sales06@switek.biz
+86 186 5927 5869
Subscribe to Us
sales06@switek.biz
+86 186 5927 5869
Subscribe to Us
| Description | Unit | Value |
|---|---|---|
| INJECTION UNIT | ||
| Shot volume | cm3 | 552 |
| Shot weight | g | 502 |
| Shot speed | mm/s | 216 |
| Screw diameter | mm | 52 |
| Injection pressure | MPa | 186 |
| Screw L:D ratio | -- | 21 |
| CLAMPING UNIT | ||
| Clamping force | kN | 2580 |
| Opening Stroke | mm | 560 |
| Space between tie bars | mm x mm | 580 x 580 |
| Mold thickness(min) | mm | 190 |
| Mold thickness(max) | mm | 580 |
| Hydraulic ejection stroke | mm | 150 |
| Hydraulic ejection force | kN | 7 |
| POWER UNIT | ||
| Pump motor | kW | 30 |
| Heating capacity | kW | 16.6 |
| GENERAL | ||
| Oil tank capacity | L | 330 |
Platen Dimension
New turn-key snack box + lids packing system started up with Hwamda hgih speed hydraulic injection molding machine and Shini injection robot and have the stacked snack boxs and lids picked by scara robot.
This is a typical injection automation application with two injection molding machines and robots, one injection molding machine/robot sets to produce the box and the other sets of injection molding machine/robot sets for lids with a SCARA robot as the transfer unit. The advantage of this solutions is it's simple and efficient for a small budget project.
To upgrade this system an optical vision control unit can be added to both side after the box and lids picked out from the injection molding machine to make sure that all the box and lids are quality products. Also for special requirem say snack box to be sold in supermarket a sticker labeling unit can be added to the system also.
Turn-key IML Solutions
Turn-key Pipe Fittings Injection Automation Solutions
Turn-key Cutlery Packing Automation Solutions
High Performance Injection Robot
ไอเอ็มแอล เทคโนโลยี เอ็กซ์เพรส
Welltec Test Their New All Electric Injection Molding Machine for Medical Parts 190D In House with 48 Cavities Luer Lock for Syringe
Welltec Machinery New Two Platen Injection Molding Machine 650JSEII Was Installed to the Customer Factory for the Production of 20L Paint Bucket
ChenHsong Launched Its New SPEED-PACK II High Speed Injection Molding Machine in Kshow 2022 for the Packaging Market
JetEngine 32 Cavities Blood Vessel Collecting System
Focus on circular economy, YIZUMI machinery is promoting their all electric injection molding machine to minimize the per kg power consumption.
G3 Automation On Show New IML Solutions at Plastico Brasil 2023
Chinaplas 2024 -- PowerJet Will On Show New Injection Molding Machine and Blow Molding Machine at Booth #4.1D64
SW7112DS - The Best Buy High Speed Injection Robot for Thin-wall Containers
CONAIR On Show New Centralized Feeding System with AI Technology at NPE 2024
Robin Dean, the CEO of Trade Group, Shared Her Opinions About NPE 2024
Contact SWITEK IML
sales06@switek.biz
+86 186 5927 5869
DongGuan, GuangDong, China
HuangYanZheng©Copy Right
