| Description | Unit | Value |
|---|---|---|
| INJECTION UNIT | ||
| Shot volume | cm3 | 2029 |
| Shot weight | g | 1846 |
| Shot speed | mm/s | 539 |
| Screw diameter | mm | 83 |
| Injection pressure | MPa | 149 |
| Screw L:D ratio | -- | 19 |
| CLAMPING UNIT | ||
| Clamping force | kN | 3980 |
| Opening Stroke | mm | 720 |
| Space between tie bars | mm x mm | 730 x 730 |
| Mold thickness(min) | mm | 250 |
| Mold thickness(max) | mm | 730 |
| Hydraulic ejection stroke | mm | 215 |
| Hydraulic ejection force | kN | 11 |
| POWER UNIT | ||
| Pump motor | kW | 60 |
| Heating capacity | kW | 31.1 |
| GENERAL | ||
| Oil tank capacity | L | 760 |
Platen Dimension
Welltec in house testing new all electric injection molding machine for medical application 190D with 48 cavities luer lock for syringe picked by Samfacc 3 Axis servo injection robot.
The new D series all electric injection molding machine by Welltec machinery is an injection molding machine designed for precise injection with high productivity. In this project it's producing the luer lock which is a protective cap for syringe. The total cycle time is 12s with robot and the weight of the part is 0.6g/pcs. With ultra rigid structure, the deformation at the hgihest pressure injection is ≤0.05mm with an injection repeatability of ±0.01mm.
In this application, the parts was picked with a Samfacc 3 axis servo Injection Robot. For an all electric injection molding machine, the robot selection can based on the size of the machine, the weight of the parts + EOAT, the total cycle time and the production environment requirement. The medical parts must be produced in a clean room, it'll request the robot to have suitable installation height, free from oil and dust during production and stability during picking and placing to ensure the precision of the parts. It's better to have the robot custom made for the project.
Turn-key IML Solutions
Turn-key Pipe Fittings Injection Automation Solutions
Turn-key Cutlery Packing Automation Solutions
High Performance Injection Robot
ไอเอ็มแอล เทคโนโลยี เอ็กซ์เพรส
Focus on circular economy, YIZUMI machinery is promoting their all electric injection molding machine to minimize the per kg power consumption.
HWAMDA (HMD) Showcased High Speed All Electric Injection Molding Machine with IML Solutions at Chinapls 2023
Haitian Celebrate the Opening of HaiTian Turkey Application Center
ENGEL All Electric Injection Molding Machine E-Motion 280T With IML System
Chinapls 2023 | HaiTian will Bring New Injection Molding Technology for Global Visitors
ENGEL On Show 4 Cavities 125ml PET/rPET Cups IML Solutions at K2022 With e-speed 280
SWITEK Finished the Inhouse Testing of Turn-key 2 Cavities Lids IML Solutions
Welltec Machinery PVC Special Injection Molding Machine Had Been Well Installed For Production
Yizumi Have Its Largest 8500T Two-Platen Injection Molding Machine Delivered to Customer
The Chairman of YuFa Group Mr. Cai Shared His Opinion of a Custom Made Injection Molding Machine in the Production of Home Living Products
Contact SWITEK IML
sales06@switek.biz
+86 186 5927 5869
DongGuan, GuangDong, China
HuangYanZheng©Copy Right