sales06@switek.biz
+86 186 5927 5869
sales06@switek.biz
+86 186 5927 5869
| Description | Unit | Value |
|---|---|---|
| INJECTION UNIT | ||
| Shot volume | cm3 | 4467 |
| Shot weight | g | 4065 |
| Shot speed | mm/s | 793 |
| Screw diameter | mm | 110 |
| Injection pressure | MPa | 157 |
| Screw L:D ratio | -- | 20 |
| CLAMPING UNIT | ||
| Clamping force | kN | 10800 |
| Opening Stroke | mm | 1900 |
| Space between tie bars | mm x mm | 1260 x 1100 |
| Mold thickness(min) | mm | 500 |
| Mold thickness(max) | mm | 1200 |
| Hydraulic ejection stroke | mm | 350 |
| Hydraulic ejection force | kN | 230 |
| POWER UNIT | ||
| Pump motor | kW | 85 |
| Heating capacity | kW | 71 |
| GENERAL | ||
| Oil tank capacity | L | 780 |
Clamping Unit
Platen Dimensions
Robot
Front View
Top View
Side View
| # | Value |
|---|---|
| A | 2470 mm |
| B | 2351 mm |
| C | 2840 mm |
| D | 2250 mm |
| E | 1676 mm |
| F | 1625 mm |
| G | 1198 mm |
| H | 1042 mm |
| I | 544 mm |
| J | 4699 mm |
| K | 4689 mm |
| M | 4014 mm |
| N | 1840 |
Why it's not recommended to have an IML solution with more than 4 cavities for containers which request a wrap+bottom labeling?
For an IML container which request a wrap + bottom labeling will need 2 labels and request a reverse injection technology. With two labels means that there would be 2 sets of magazines and mandrel to stock and pick the labels for the containers. A four cavities design of the mold there would be sufficient space in the IML robot to fit in the extra magazines, but for more cavities mold design the size of the magazine will exceed the limit of the IML robot and will reduce the efficiency of the robot. It would not be an ideal solutions for Wrap + Bottom IML Solutions
Hot Injection Automation News
E-mail: sales@switek.biz
Contact Blogger
sales06@switek.biz
+86 186 5927 5869
DongGuan, GuangDong, China
