JU5500III -- HaiTian JUPITER Two-Platens Servo Injection Moulding Machine

JU5500III-3430B twoplaten Injection Molding Machine

Machine Specification

Description	Unit	Value
INJECTION UNIT
Shot volume	cm³	1860
Shot weight	g	1692
Shot speed	mm/s	503
Screw diameter	mm	80
Injection pressure	MPa	159
Screw L:D ratio	--	20
CLAMPING UNIT
Clamping force	kN	5500
Opening Stroke	mm	1300
Space between tie bars	mm x mm	920 x 830
Mold thickness(min)	mm	350
Mold thickness(max)	mm	900
Hydraulic ejection stroke	mm	250
Hydraulic ejection force	kN	110
POWER UNIT
Pump motor	kW	55
Heating capacity	kW	39
GENERAL
Oil tank capacity	L	520

Machine Dimension

Clamping Unit

Platen Dimensions

Robot

Front View

Top View

Side View

#	Value
A	2110 mm
B	2016 mm
C	2366 mm
D	2250 mm
E	1175 mm
F	1175
G	1082 mm
H	903 mm
I	675 mm
J	3581 mm
K	3612 mm
M	3056 mm
N	1400

Q & A

For vision control system for IML containers, what's the advantages and disadvantages of the open type of vision control system?

Vision control is now a very important in IML system especially the IML solutions for dairy products packages like yogurt cups, butter cups etc. For most European IML solutions providers like BRINK that they'll choose an open type of Vision control system which will check if the containers are well labeled or not immediately after the containers picked out from the mold and have them re-stacked after the vision control. This kind of solution will help to increase the efficiency of the IML System and pick out the defect parts quickly.

But, for some minor defect like dirt it would be impossible to be checked out because the precision of the cameras would be influenced by the changing light of the environment. To solve this problem the updated solution would be to have the IML containers checked in a closed light box which will creat a stable environment to the camera to minimize the misjudgement of the good and non good parts. -- SWITEK Yogurt Cups Vision Control Solution

Hot Injection Automation News