sales06@switek.biz
+86 186 5927 5869
Description | Unit | Value |
---|---|---|
INJECTION UNIT | ||
Shot volume | cm3 | 1068 |
Shot weight | g | 972 |
Shot speed | mm/s | 439 |
Screw diameter | mm | 65 |
Injection pressure | MPa | 182 |
Screw L:D ratio | -- | 21.5 |
CLAMPING UNIT | ||
Clamping force | kN | 6500 |
Opening Stroke | mm | 1350 |
Space between tie bars | mm x mm | 1040 x 910 |
Mold thickness(min) | mm | 400 |
Mold thickness(max) | mm | 950 |
Hydraulic ejection stroke | mm | 250 |
Hydraulic ejection force | kN | 110 |
POWER UNIT | ||
Pump motor | kW | 55 |
Heating capacity | kW | 33 |
GENERAL | ||
Oil tank capacity | L | 450 |
Clamping Unit
Platen Dimensions
Robot
Front View
Top View
Side View
# | Value |
---|---|
A | 2165 mm |
B | 2066 mm |
C | 2327 mm |
D | 2200 mm |
E | 1290 mm |
F | 1290 |
G | 1082 mm |
H | 903 mm |
I | 675 mm |
J | 3746 mm |
K | 3707 mm |
M | 3191 mm |
N | 1560 |
For a Container with a Height of 100mm, What Would be the Minimal Opening Stroke of the Injection Molding Machine?
As we know, for the IML production of a container, the robot will do the actions of parts picking and label inserting in the mold, which means that the system will request a much larger in mold space compared to non-IML production. While selecting an injection molding machine for your IML project, the opening stroke of the injection molding machine would be a very important parameter to be taken into consideration. The basic formular for the opening stoke caculation would be heigh of the parts x 3 + 150mm, the potential injection molding machine must have a larger opening stroke, or the robot may not able to pick the parts and insert the labels symtaneously.
Hot Injection Automation News
E-mail: sales@switek.biz
Contact Blogger
sales06@switek.biz
+86 186 5927 5869
DongGuan, GuangDong, China