JU7500III -- HaiTian JUPITER Two-Platens Servo Injection Moulding Machine

JU7500III - 6730A Twoplaten Injection Molding Machine

Machine Specification

Description	Unit	Value
INJECTION UNIT
Shot volume	cm³	2990
Shot weight	g	2721
Shot speed	mm/s	642
Screw diameter	mm	90
Injection pressure	MPa	193
Screw L:D ratio	--	24.4
CLAMPING UNIT
Clamping force	kN	7500
Opening Stroke	mm	1400
Space between tie bars	mm x mm	1110 x 960
Mold thickness(min)	mm	450
Mold thickness(max)	mm	950
Hydraulic ejection stroke	mm	300
Hydraulic ejection force	kN	195
POWER UNIT
Pump motor	kW	85
Heating capacity	kW	71
GENERAL
Oil tank capacity	L	780

Machine Dimension

Clamping Unit

Platen Dimensions

Robot

Front View

Top View

Side View

#	Value
A	2208 mm
B	2106 mm
C	2700 mm
D	2200 mm
E	1506 mm
F	1354 mm
G	1198 mm
H	1042 mm
I	544 mm
J	4055 mm
K	4689 mm
M	3450 mm
N	1607

Q & A

For Thin Wall Container IML Production, Will YIZUME P250E or P250K3 a Better Choice for Your Project?

As for which injection molding machine is a better choice for your IML project, it'll depends on your budget and requirement about the parts. As we know both P250E and P280K3 are excellent high speed injection molding machine designed for the injection production of thin wall containers with high injection speed for the fast injection of thin wall containers. They're no dobt excellent injection molding machine for your IML project. But, how to make a decision between?

Both P250E and P250K3 has similar injection speed (300/500 mm/s optional for P250E and 320mm/s for P250K3) but P250E is an all electric injection molding machine while P250K3 is a high speed hydraulic injection molding machine. Of course an all electric injection molding machine is a better choice for food container IML production, but, the cost of it would be much higher than P250K3. So, if your budget is sufficient, P250E, if not, P250K3 would be the right one for you.

The IML robot for YIZUMI P250K3/P250E would be SWITEK IML Robot SW833. In K2019 SWITEK IML robot SW833 work with P250E in demo of 4 cavities cups at the cycle time of 2.1s, this combination is one of the best IML solution for small size containers IML production.

Hot Injection Automation News