JU9000III -- HaiTian JUPITER Two-Platens Servo Injection Moulding Machine

Description	Unit	Value
INJECTION UNIT
Shot volume	cm³	5768
Shot weight	g	5249
Shot speed	mm/s	1097
Screw diameter	mm	120
Injection pressure	MPa	136
Screw L:D ratio	--	20.2
CLAMPING UNIT
Clamping force	kN	9000
Opening Stroke	mm	1600
Space between tie bars	mm x mm	1180 x 1000
Mold thickness(min)	mm	500
Mold thickness(max)	mm	1100
Hydraulic ejection stroke	mm	300
Hydraulic ejection force	kN	195
POWER UNIT
Pump motor	kW	75
Heating capacity	kW	54
GENERAL
Oil tank capacity	L	960

Clamping Unit

Platen Dimensions

Robot

Front View

Top View

Side View

#	Value
A	2398 mm
B	2286 mm
C	2850 mm
D	2265 mm
E	1627 mm
F	1577 mm
G	1228 mm
H	1102 mm
I	544 mm
J	4512 mm
K	5021 mm
M	3857 mm
N	1740

20L Bucket Side Entry IML Solutions Single Cavity.

NPE 2024, Milacron on show 2 cavities 20L pails side entry IML solution with co-injection technology by 1070 Ton injection molding machine with IML solutions provided by BECK.

The high lights of the system is two material 3 layors co-injection technology with will enable a use of up to 50% of re-cycled material. This technology will help to reduce the use of plastic and carbon release in the production of 20L pails. As the world leading injection mold manufacturer, the co-injection technology mold by mold master is the milestone of this system.

Unlike the Chinese will produce the 20L pails by a 650T injection molding machine with one cavity to reduce the machinery purchasing cost, the Milacron 1070T machine solution will provide the producer a more efficient solution of Pails production. With the IML solution provided by the worlding leading IML solution provider BECK, the Milacron 2 cavities IML systeem will represent an IML system of efficient, reliable with cutting edge technology.

Turn-key IML Solutions