High Speed Hydraulic Injection Molding Machine KF168-V6/S6 -- Powerjet Plastic Machinery Co., Ltd.

Description	Unit	Value
INJECTION UNIT
Shot volume	cm³	201
Shot weight	g	179
Shot speed	mm/s	225
Screw diameter	mm	42
Injection pressure	MPa	204
Screw L:D ratio	--	22
CLAMPING UNIT
Clamping force	kN	1680
Opening Stroke	mm	440
Space between tie bars	mm x mm	460 x 460
Mold thickness(min)	mm	160
Mold thickness(max)	mm	500
Hydraulic ejection stroke	mm	140
Hydraulic ejection force	kN	49
POWER UNIT
Pump motor	kW	60
Heating capacity	kW	14.2
GENERAL
Oil tank capacity	L	340

Platen Dimension

Machine Dimmension

#	Value
A	350 mm
B	70 mm
C	35 mm
D	4-M16*32 mm
E	600 mm
F	600 mm
G	353 mm
H	440 mm
M	/

JH-WELLTEC Machine India Pvt. Ltd. on show Welltec new injection molding machine SEII 380 in production of one cavity chair without robot picking in exhibition to show the capacity of the injection molding machine.

In the demo show JH-WELLTEC Machine India Pvt. Ltd. chose a cold runner mold in production of the chair. The advantage of the cold runner mold is it's lower cost and easier for maintenance but will have a runner to be removed manually or automatically. In this show JH-WELLTEC Machine to have the chair free dropped and the runner removed manually. It's economic but not attracting to visitors in an exhibition.

To provide customer with a more efficient turn-key injection automation solution, the better choice would be to have the injection molding machine equipped with a SWITEK 3 axis servo injection robot SW6712DS-20 which has a payload up to 8kg and could be easilly programmed with EOAT sets to remove the runner automatically.

Turn-key IML Solutions