MARS 10000/7950G -- HaiTian Mars.G Series Servo Injection Moulding Machine

MA10000/7950G - A servo Injection Molding Machine

Machine Specification

Description	Unit	Value
INJECTION UNIT
Shot volume	cm³	3770
Shot weight	g	3431
Shot speed	mm/s	703
Screw diameter	mm	100
Injection pressure	MPa	211
Screw L:D ratio	--	24.2
CLAMPING UNIT
Clamping force	kN	10000
Opening Stroke	mm	1100
Space between tie bars	mm x mm	1090 x 1090
Mold thickness(min)	mm	500
Mold thickness(max)	mm	1100
Hydraulic ejection stroke	mm	320
Hydraulic ejection force	kN	215
POWER UNIT
Pump motor	kW	92
Heating capacity	kW	81
GENERAL
Oil tank capacity	L	1350

Machine Dimension

Platen Dimensions

Machine Dimmension

Q & A

Why There's An Additional Static Charge Ring Installed to Some IML System?

For visitors of SWITEKK website will find that for the IML system no matter if it's side entry IML robot or Top Entry IML Robot, you can see a ring just outside the mold area in some of the IML system but not to the other IML system. Why would it happen and what's the function of this ring to the IML system?

The ring installed is a static charging ring. For a better understanding of the function of this static charging ring we'll need to know the types of the labels which we're using in an IML project. For an IML container made from PP (Polypropylene) there're two main types of IML labels, the regular material IML labels which could be easily static charged from the inner side of the label and the metallic label of which has a metallic layer will releas the static immediately. In this case we'll need to have the label static charged from outside of the label. That's why an extra static charging ring is to be installed to the IML system to ensure that the metallic IML label could be well static charged.

For more knowledge about IML and IML solutions just follow up https://www.gechiml.com for the up to date solutions of IML from SWITEK automation and contact Adams for a turn-key solutions of IML.

Hot Injection Automation News