sales06@switek.biz
+86 186 5927 5869
Subscribe to Us
sales06@switek.biz
+86 186 5927 5869
Subscribe to Us
| Description | Unit | Value |
|---|---|---|
| INJECTION UNIT | ||
| Shot volume | cm3 | 173 |
| Shot weight | g | 157 |
| Shot speed | mm/s | 89 |
| Screw diameter | mm | 36 |
| Injection pressure | MPa | 210 |
| Screw L:D ratio | -- | 23.3 |
| CLAMPING UNIT | ||
| Clamping force | kN | 1200 |
| Opening Stroke | mm | 350 |
| Space between tie bars | mm x mm | 410 x 410 |
| Mold thickness(min) | mm | 150 |
| Mold thickness(max) | mm | 430 |
| Hydraulic ejection stroke | mm | 120 |
| Hydraulic ejection force | kN | 33 |
| POWER UNIT | ||
| Pump motor | kW | 13 |
| Heating capacity | kW | 11.55 |
| GENERAL | ||
| Oil tank capacity | L | 220 |
Platen Dimensions
Machine Dimmension
Arge Automation double arms top entry IML solutions for 1 cavity bucket synchronous IML production
For double arms top entry IML solutions it's mostly a solution for the production of IML Lids to have a synchronous parts picking and labeling for a higher production efficiency but not increase the size of the injection molding machine too much. To have a double arms top entry IML solution for the production of IML bucket is a brave adenture in system design because an injection molding machine with sufficient opening stroke will increase the cost of the system dramatically.
A better solution for efficient IML production of IML production would be a Side Entry IML Robot which will have a much better consistence of the parts and much shorter in mold time for a higher productivity. Any, ARGE have a double arms top entry IML robot for the production of IML buckets is a new try and provide more opportunities to the small and medium size IML buckets producers.
Turn-key IML Solutions
Turn-key Pipe Fittings Injection Automation Solutions
Turn-key Cutlery Packing Automation Solutions
High Performance Injection Robot
ไอเอ็มแอล เทคโนโลยี เอ็กซ์เพรส
Haida Machinery Launched Their New Hybrid Injection Molding Machine DC3600 In Chinaplas2023 with a 2 Cavities 1000ml Buckets Side Entry IML Solutions.
HQ Mould Showcase 4 Cavities Lids IML Production at Chinaplas 2023
Yizumi Have Its Largest 8500T Two-Platen Injection Molding Machine Delivered to Customer
Sumitomo Onshow New All Electric Injection Molding Machine IntElect S220 With 4 Cavities Lids IML Solutions
A New Forza Series Two Platen Injection Molding Machine by Ningbo LK Technology Co., Ltd. Was Installed for the Production of Plastic Chairs.
Sumitomo (SHI) Demag Showcased 1.8 Seconds IML Solutions with Their New El-Exis SP 200-920 Hybrid Injection Molding Machine
Yizumi Showed Star Injection Molding Machines In Plastindia 2023
SWITEK New IML System for 6 Cavities Cups with Metallic Label is Ready for Bulk Production
Chinaplas 2023 | YanHign Group Will Onshow Their New Hybrid Tow-platen Injection Moulding Machine
Roboplas Top Entry IML Robot Installed 1 Cavity Pail
Contact SWITEK IML
sales06@switek.biz
+86 186 5927 5869
DongGuan, GuangDong, China
HuangYanZheng©Copy Right
