sales06@switek.biz
+86 186 5927 5869
Subscribe to Us
sales06@switek.biz
+86 186 5927 5869
Subscribe to Us
| Description | Unit | Value |
|---|---|---|
| INJECTION UNIT | ||
| Shot volume | cm3 | 231 |
| Shot weight | g | 169 |
| Shot speed | mm/s | 610 |
| Screw diameter | mm | 40 |
| Injection pressure | MPa | 203 |
| Screw L:D ratio | -- | 25 |
| CLAMPING UNIT | ||
| Clamping force | kN | 1600 |
| Opening Stroke | mm | 500 |
| Space between tie bars | mm x mm | 520 x 520 |
| Mold thickness(min) | mm | 275 |
| Mold thickness(max) | mm | 585 |
| Hydraulic ejection stroke | mm | 160 |
| Hydraulic ejection force | kN | 59 |
| POWER UNIT | ||
| Pump motor | kW | 81 |
| Heating capacity | kW | 13.9 |
| GENERAL | ||
| Oil tank capacity | L | 380 |
Platen Dimension
Machine Dimmension
| # | Value |
|---|---|
| A | 156 mm |
| B | -14 mm |
| C | 992 mm |
| D Max | 1625 mm |
| G | 2064 mm |
| M | 5398 mm |
| F Min | 887 mm |
| S | 237 mm |
| SH | 1151 mm |
ARGE 3 axis servo top entry IML robot installed for the production of 20L IML paints bucket.
To reduce the cost of the IML system especially the injection molding machine, ARGE adopted a two step IML solutions simliar to which is popular among the top entry IML solutions for buckets by SWITEK which will have the buckets picking and labeling done asynchronous instead of synchronous to have the IML buckets produced by a smaller injection molding machine to reduce the investment of the machinery.
As an IML System provider since 2009, SWITEK Automation is continuing providing high performace IML Solutions of both top entry and side entry to clients around the world as a perfect subsition to low budget IML projects against the European IML solutions provider to make the small IML business profitable.
Turn-key IML Solutions
Turn-key Pipe Fittings Injection Automation Solutions
Turn-key Cutlery Packing Automation Solutions
High Performance Injection Robot
ไอเอ็มแอล เทคโนโลยี เอ็กซ์เพรส
Haida Machinery Launched Their New Hybrid Injection Molding Machine DC3600 In Chinaplas2023 with a 2 Cavities 1000ml Buckets Side Entry IML Solutions.
Ningbo LK Technology Co., ltd. Inhouse Testing Their New Forza Two-platen Injection Molding Machine with IML Solutions
Chinaplas 2023 | Yizumi will Demo LED Bead Molding Solution with New All Electric Injection Molding Macine FF200
NingBo LK Technology Co., Ltd. New Two Platen Injection Molding Machine FA2500 Installed for Plastic Pallet Production
Arburg Show Case ULTIMATE ALL AROUNDER 720A with 4 Cavities Thin-wall Cups IML Solutions
Sumitomo Onshow New All Electric Injection Molding Machine IntElect S220 With 4 Cavities Lids IML Solutions
A New Forza Series Two Platen Injection Molding Machine by Ningbo LK Technology Co., Ltd. Was Installed for the Production of Plastic Chairs.
FCS Released Its All-Electric Two Components Injection Molding Machine With a Production Demo of Air Tight Container
WETEC Showcased IML Solutions of 4 Cavities Cups at the Cycle Time of 2.9s
Arburg on Show Handle Assembly IML System in 2012
Contact SWITEK IML
sales06@switek.biz
+86 186 5927 5869
DongGuan, GuangDong, China
HuangYanZheng©Copy Right
