Systec 160/520 -- Sumitomo High Speed Injection Molding Machine and IML Application

Description	Unit	Value
Shot volume	cm³	231
Shot weight	g	210
Shot speed	mm/s	610
Screw diameter	mm	40
Injection pressure	MPa	203
Screw L:D ratio	--	20
CLAMPING UNIT
Clamping force	kN	1600
Opening Stroke	mm	500
Space between tie bars	mm x mm	520 x 520
Mold thickness(min)	mm	275
Mold thickness(max)	mm	585
Hydraulic ejection stroke	mm	160
Hydraulic ejection force	kN	59
POWER UNIT
Pump motor	kW	78
Heating capacity	kW	11.1
GENERAL
Oil tank capacity	L	380

Description

Unit

Value

INJECTION UNIT

Shot volume

cm³

231

Shot weight

210

Shot speed

mm/s

610

Screw diameter

Injection pressure

MPa

203

Screw L:D ratio

CLAMPING UNIT

Clamping force

1600

Opening Stroke

500

Space between tie bars

mm x mm

520 x 520

Mold thickness(min)

275

Mold thickness(max)

585

Hydraulic ejection stroke

160

Hydraulic ejection force

POWER UNIT

Pump motor

Heating capacity

11.1

GENERAL

Oil tank capacity

380

#	Value
A	156 mm
B	-14 mm
C	992 mm
D Max	1625 mm
G	2064 mm
M	5398 mm
F Min	887 mm
S	237 mm
SH	1151 mm

Value

156 mm

-14 mm

992 mm

D Max

1625 mm

2064 mm

5398 mm

F Min

887 mm

237 mm

1151 mm

Q & A

Why is HMD270M8SPV One of the Best High Speed Hydraulic Injection Molding Machine for Small Size Containers IML Production?

As one of the best buy high speed hydraulic injection molding machine for thin-wall containers made in China, HMD270M8SPV is no doubt one an excellent injection molding machine for thin-wall containers high speed production. As the star injection molding machine by HMD group, HMD270M8SPV has the advangates below:

Improved platen with high rigidity structure, especially suitable for thin-wall containers IML production.
Parallel movement and high-speed/low pressure injection movement that shortens circle time, especially for thin wall products IML production.
High-speed hydraulic motor.
Opening stroke up to 560mm, suitable for the IML productions of containers with height up to 136mm.
Injection speed up to 368mm/s, with possible of a cycle time of IML production lower to 2s.

To match the excellent injection speed of HMD270M8SPV, the best IML robot would be SWITEK high speed side entry IML Robot SW833, with the control system by the European automation control system supplier SigmaTek, the dry cycle time of the IML robot can be lower than 2.1s, which will perfecctly match the productivity of HMD270M8SPV.

Systec 160/520-430B HighSpeed Injection Molding Machine

Machine Specification

Machine Dimension

Q & A