sales06@switek.biz
+86 186 5927 5869
Subscribe to Us
sales06@switek.biz
+86 186 5927 5869
Subscribe to Us
| Description | Unit | Value |
|---|---|---|
| INJECTION UNIT | ||
| Shot volume | cm3 | 763 |
| Shot weight | g | 695 |
| Shot speed | mm/s | 450 |
| Screw diameter | mm | 60 |
| Injection pressure | MPa | 191 |
| Screw L:D ratio | -- | 20 |
| CLAMPING UNIT | ||
| Clamping force | kN | 2100 |
| Opening Stroke | mm | 575 |
| Space between tie bars | mm x mm | 580 x 580 |
| Mold thickness(min) | mm | 340 |
| Mold thickness(max) | mm | 690 |
| Hydraulic ejection stroke | mm | 180 |
| Hydraulic ejection force | kN | 73 |
| POWER UNIT | ||
| Pump motor | kW | 110 |
| Heating capacity | kW | 23.1 |
| GENERAL | ||
| Oil tank capacity | L | 420 |
Platen Dimension
Machine Dimmension
| # | Value |
|---|---|
| A | 222 mm |
| B | 816 mm |
| C | 921 mm |
| D Max | 1600 mm |
| G | 2286 mm |
| M | 6842 mm |
| F Min | 1041 mm |
| S | 237 mm |
| SH | 2226 mm |
JetEngine new IML robot for 2 compartment container IML production of 2 cavities mould started up successfuly in production.
The two compartments cup is one of the most popular container for Yogurt among the European dairy producers which is a samart solution to serve some other ingredients together with the Yogort of the original taste like a combo of nuts. The combination of Yogurt + nuts will provide the consumer a low fat suppliment of engergy immediatly. It's warmly welcomed by the office ladies.
Althoug it's a smart container for Yogurt, but it's not so smart to produce. With 3 labels to one cup from different side, it's a challenge to any IML solution providers. With modular design, the SW8 Series of IML robot by SWITEK is an ideal choice for the production of 2 compartmnets IML Cups.
Turn-key IML Solutions
Turn-key Pipe Fittings Injection Automation Solutions
Turn-key Cutlery Packing Automation Solutions
High Performance Injection Robot
ไอเอ็มแอล เทคโนโลยี เอ็กซ์เพรส
The Worlds Top IML Solutions Provider BECK Automation Released There Precise Medical IML Solutions
SWITEK Engineer Finished the Installation of New Magazines in Chile
Chinaplas 2023 | SumitomoSHIDEMAG will Show up their Two Tone Injection Molding Machine
The Chairman of YuFa Group Mr. Cai Shared His Opinion of a Custom Made Injection Molding Machine in the Production of Home Living Products
Haitian Opened its Factory to Welcome Their Customers from Malaysia to Showcase Their Technology and Capacity in Injection Machinery Industry
Arge Robotik Showcase New IML Robot for Rectangular Bucket 2 Cavities
BOLE Intelligent Machinery is Ready for Plast Eurasia Istanbul with a Turn-key Cutlery Injection Automation Solution
Arge Double Arms Top Entry IML Systems for Buckets
Milacron Showcased Co-Injection Technology of 2 Cavities 20L IML Pails at NPE 2024
Chinaplas2024 -- Wittmann Will Show Up New Robotic Technology at Booth#4.1D41
Contact SWITEK IML
sales06@switek.biz
+86 186 5927 5869
DongGuan, GuangDong, China
HuangYanZheng©Copy Right
