sales06@switek.biz
+86 186 5927 5869
Subscribe to Us
sales06@switek.biz
+86 186 5927 5869
Subscribe to Us
| Description | Unit | Value |
|---|---|---|
| INJECTION UNIT | ||
| Shot volume | cm3 | 891 |
| Shot weight | g | 810 |
| Shot speed | mm/s | 450 |
| Screw diameter | mm | 60 |
| Injection pressure | MPa | 243 |
| Screw L:D ratio | -- | 20 |
| CLAMPING UNIT | ||
| Clamping force | kN | 3500 |
| Opening Stroke | mm | 730 |
| Space between tie bars | mm x mm | 720 x 720 |
| Mold thickness(min) | mm | 350 |
| Mold thickness(max) | mm | 745 |
| Hydraulic ejection stroke | mm | 200 |
| Hydraulic ejection force | kN | 73 |
| POWER UNIT | ||
| Pump motor | kW | 128 |
| Heating capacity | kW | 23.1 |
| GENERAL | ||
| Oil tank capacity | L | 580 |
Platen Dimension
Machine Dimmension
| # | Value |
|---|---|
| A | 287 mm |
| B | 809 mm |
| C | 936 mm |
| D Max | 1682 mm |
| G | 2408 mm |
| M | 7761 mm |
| F Min | 1474 mm |
| S | 546 mm |
| SH | 1852 mm |
Today I find an interested video in youtube published by FCS Machinery to demonstrate the two tone injection production of 680ml airtight container by their new All-Electric two-component injection molding machine CT-230R which was designed for the production of two-component and multi-component products, including electronic parts, medical appliance, cosmetic containers, etc.
Although it's a 230Ton machine, but as a two-component injection molding machine its size will usually much larger than the standard servo injection molding machine, the robot to recommend here is SW6710DS-20 which is a 3 axis servo injection robot with a payload up to 6kg. Stable and efficient as it's, for sure will help you greatly in your production.
Turn-key IML Solutions
Turn-key Pipe Fittings Injection Automation Solutions
Turn-key Cutlery Packing Automation Solutions
High Performance Injection Robot
ไอเอ็มแอล เทคโนโลยี เอ็กซ์เพรส
Fakuma 2023 -- ENGEL on Show their All Electric Injection Molding Machine with Turn-key IML Solutions
Haida представила на Руспласте новую гибридную термопластавтомат
FCS Released Its All-Electric Two Components Injection Molding Machine With a Production Demo of Air Tight Container
Chinaplas 2023 | YanHign Group Will Onshow Their New Hybrid Tow-platen Injection Moulding Machine
Sumitomo (SHI) Demag Showcased 1.8 Seconds IML Solutions with Their New El-Exis SP 200-920 Hybrid Injection Molding Machine
Chinaplas 2024 -- HWAMDA (HMD) On Show New High Speed Injection Molding Machine at Booth#5.1D52
Arge Robotik New 3 Axis Top Entry IML Robot Installed to the Lisong Injection Molding Machine for the Production of 20L IML Buckets
JetEngine New IML Robot Installed for 8 Cavities Cups IML Production
The Chairman of YuFa Group Mr. Cai Shared His Opinion of a Custom Made Injection Molding Machine in the Production of Home Living Products
Lisong Machinery Started Its New High Speed Injection Molding Machine LS288G6 Up with a 32 Cavities Spoons Injection Solutions
Contact SWITEK IML
sales06@switek.biz
+86 186 5927 5869
DongGuan, GuangDong, China
HuangYanZheng©Copy Right
