sales06@switek.biz
+86 186 5927 5869
Subscribe to Us
sales06@switek.biz
+86 186 5927 5869
Subscribe to Us
| Description | Unit | Value |
|---|---|---|
| INJECTION UNIT | ||
| Shot volume | cm3 | 530 |
| Shot weight | g | 387 |
| Shot speed | mm/s | 510 |
| Screw diameter | mm | 50 |
| Injection pressure | MPa | 243 |
| Screw L:D ratio | -- | 25 |
| CLAMPING UNIT | ||
| Clamping force | kN | 4200 |
| Opening Stroke | mm | 770 |
| Space between tie bars | mm x mm | 820 x 820 |
| Mold thickness(min) | mm | 380 |
| Mold thickness(max) | mm | 825 |
| Hydraulic ejection stroke | mm | 230 |
| Hydraulic ejection force | kN | 96 |
| POWER UNIT | ||
| Pump motor | kW | 113 |
| Heating capacity | kW | 18.3 |
| GENERAL | ||
| Oil tank capacity | L | 820 |
Platen Dimension
Machine Dimmension
| # | Value |
|---|---|
| A | 257 mm |
| B | -3 mm |
| C | 1105 mm |
| D Max | 1795 mm |
| G | 2469 mm |
| M | 8025 mm |
| F Min | 1243 mm |
| S | 305 mm |
| SH | 2291 mm |
New 8 Cavities Disposable Plastic Cups by PowerJet KF300 High Speed Thin-wall Injection Molding Machine.
The newly started up disposable cups project by PowerJet KF300-S8 is a price smart solution for the production of disposable cups in large quantity. Powerject machinery is one of the earliest high speed injection molding machine maker from China and is experienced in the solution of thin-wall containers injection. A 300T high speed injection molding machine with an 8 cavities mold for disposable cups production is to be regarded as a perfect combination of investment and productivity. The robot recommended for this injection molding machine would be SWITEK high speed 3 axis servo injection molding machine SW7112DS.
Turn-key IML Solutions
Turn-key Pipe Fittings Injection Automation Solutions
Turn-key Cutlery Packing Automation Solutions
High Performance Injection Robot
ไอเอ็มแอล เทคโนโลยี เอ็กซ์เพรส
SWITEK Automation Showcased Cutlery Packing System at Chinaplas 2018
SWITEK Automation New 4 Cavities Pipe Strap Nuts In Mold Insertion Automation Solutions for LESSO Group Put in USE.
SWITEK new 2 cavities rectangular boxes 5 faces IML labeling top entry IML system installed for production.
NPE 2024 -- Yushin On Show MKA Series Large Robot
HQ Mould Showcase 4 Cavities Lids IML Production at Chinaplas 2023
FCS Servo Injection Molding Machine SA-330P Disposable Tableware Injection Production Solutions
Arburg Released New Turn-key IML Solutions for Pharmaceutical Tubes IML Solutions
Haida представила на Руспласте новую гибридную термопластавтомат
Haitian Group New JUPITER Series Two Platen Injection Molding Machine JU18500III Installed for EIPP Production
BORCHE On Show 660 US Ton Injection Molding Machine at NPE 2024
Contact SWITEK IML
sales06@switek.biz
+86 186 5927 5869
DongGuan, GuangDong, China
HuangYanZheng©Copy Right
