sales06@switek.biz
+86 186 5927 5869
Subscribe to Us
sales06@switek.biz
+86 186 5927 5869
Subscribe to Us
| Description | Unit | Value |
|---|---|---|
| INJECTION UNIT | ||
| Shot volume | cm3 | 1362 |
| Shot weight | g | 124 |
| Shot speed | mm/s | 380 |
| Screw diameter | mm | 70 |
| Injection pressure | MPa | 242 |
| Screw L:D ratio | -- | 23 |
| CLAMPING UNIT | ||
| Clamping force | kN | 4200 |
| Opening Stroke | mm | 770 |
| Space between tie bars | mm x mm | 820 x 820 |
| Mold thickness(min) | mm | 380 |
| Mold thickness(max) | mm | 825 |
| Hydraulic ejection stroke | mm | 230 |
| Hydraulic ejection force | kN | 96 |
| POWER UNIT | ||
| Pump motor | kW | 166 |
| Heating capacity | kW | 30.6 |
| GENERAL | ||
| Oil tank capacity | L | 820 |
Platen Dimension
Machine Dimmension
| # | Value |
|---|---|
| A | 292 mm |
| B | 1519 mm |
| C | 906 mm |
| D Max | 1839 mm |
| G | 2464 mm |
| M | 9544 mm |
| F Min | 1960 mm |
| S | 534 mm |
| SH | 2381 mm |
New turn-key snack box + lids packing system started up with Hwamda hgih speed hydraulic injection molding machine and Shini injection robot and have the stacked snack boxs and lids picked by scara robot.
This is a typical injection automation application with two injection molding machines and robots, one injection molding machine/robot sets to produce the box and the other sets of injection molding machine/robot sets for lids with a SCARA robot as the transfer unit. The advantage of this solutions is it's simple and efficient for a small budget project.
To upgrade this system an optical vision control unit can be added to both side after the box and lids picked out from the injection molding machine to make sure that all the box and lids are quality products. Also for special requirem say snack box to be sold in supermarket a sticker labeling unit can be added to the system also.
Turn-key IML Solutions
Turn-key Pipe Fittings Injection Automation Solutions
Turn-key Cutlery Packing Automation Solutions
High Performance Injection Robot
ไอเอ็มแอล เทคโนโลยี เอ็กซ์เพรส
Chinapas 2024 -- ChenHsong Will Showcase New Injection Molding Machine at Booth #5.1C32
BORCHE is On Showing New All Electric Injection Molding Machine at Chinaplas 2024 Booth#5.1D22
Eurasia Robotic 8 Cavities Box IML System Installed
Fakuma 2024 is Opening on 15 October, 2024 at Friedrichshafen, Germany
Arge Robotik Showcase New IML Robot for Rectangular Bucket 2 Cavities
Ambiente Plastico Interviewed Haitian Group at Plastimagen 2023 in Mexico
NPE 2024 -- Yushin On Show MKA Series Large Robot
K-Fair 2022, FANUC on Show Turn-key Bio Plastics Injection Solutions
Sumitomo (SHI) Demag Demonstrate Their 4th Generation Hybrid Injection Molding Machien EL-EXIS SP420 On a 4+4 Cavities Stack Mould 500gram Butter Box IML Solution
Focus on circular economy, YIZUMI machinery is promoting their all electric injection molding machine to minimize the per kg power consumption.
Contact SWITEK IML
sales06@switek.biz
+86 186 5927 5869
DongGuan, GuangDong, China
HuangYanZheng©Copy Right
