Systec 420/820 C SP -- Sumitomo High Speed Injection Molding Machine and IML Solutions

Description	Unit	Value
Shot volume	cm³	1779
Shot weight	g	1299
Shot speed	mm/s	320
Screw diameter	mm	80
Injection pressure	MPa	186
Screw L:D ratio	--	24
CLAMPING UNIT
Clamping force	kN	4200
Opening Stroke	mm	770
Space between tie bars	mm x mm	820 x 820
Mold thickness(min)	mm	380
Mold thickness(max)	mm	825
Hydraulic ejection stroke	mm	230
Hydraulic ejection force	kN	96
POWER UNIT
Pump motor	kW	178
Heating capacity	kW	42.6
GENERAL
Oil tank capacity	L	820

Description

Unit

Value

INJECTION UNIT

Shot volume

cm³

1779

Shot weight

1299

Shot speed

mm/s

320

Screw diameter

Injection pressure

MPa

186

Screw L:D ratio

CLAMPING UNIT

Clamping force

4200

Opening Stroke

770

Space between tie bars

mm x mm

820 x 820

Mold thickness(min)

380

Mold thickness(max)

825

Hydraulic ejection stroke

230

Hydraulic ejection force

POWER UNIT

Pump motor

178

Heating capacity

42.6

GENERAL

Oil tank capacity

820

#	Value
A	292 mm
B	1519 mm
C	906 mm
D Max	1839 mm
G	2464 mm
M	9544 mm
F Min	1960 mm
S	534 mm
SH	2381 mm

Value

292 mm

1519 mm

906 mm

D Max

1839 mm

2464 mm

9544 mm

F Min

1960 mm

534 mm

2381 mm

Q & A

Why is HMD270M8SPV One of the Best High Speed Hydraulic Injection Molding Machine for Small Size Containers IML Production?

As one of the best buy high speed hydraulic injection molding machine for thin-wall containers made in China, HMD270M8SPV is no doubt one an excellent injection molding machine for thin-wall containers high speed production. As the star injection molding machine by HMD group, HMD270M8SPV has the advangates below:

Improved platen with high rigidity structure, especially suitable for thin-wall containers IML production.
Parallel movement and high-speed/low pressure injection movement that shortens circle time, especially for thin wall products IML production.
High-speed hydraulic motor.
Opening stroke up to 560mm, suitable for the IML productions of containers with height up to 136mm.
Injection speed up to 368mm/s, with possible of a cycle time of IML production lower to 2s.

To match the excellent injection speed of HMD270M8SPV, the best IML robot would be SWITEK high speed side entry IML Robot SW833, with the control system by the European automation control system supplier SigmaTek, the dry cycle time of the IML robot can be lower than 2.1s, which will perfecctly match the productivity of HMD270M8SPV.

Systec 420/820 C SP-3300D HighSpeed Injection Molding Machine

Machine Specification

Machine Dimension

Q & A