sales06@switek.biz
+86 186 5927 5869
sales06@switek.biz
+86 186 5927 5869
| Description | Unit | Value |
|---|---|---|
| INJECTION UNIT | ||
| Shot volume | cm3 | 238 |
| Shot weight | g | 217 |
| Shot speed | mm/s | 199 |
| Screw diameter | mm | 40 |
| Injection pressure | MPa | 168 |
| Screw L:D ratio | -- | 20.9 |
| CLAMPING UNIT | ||
| Clamping force | kN | 1180 |
| Opening Stroke | mm | 350 |
| Space between tie bars | mm x mm | 380 x 380 |
| Mold thickness(min) | mm | 140 |
| Mold thickness(max) | mm | 430 |
| Hydraulic ejection stroke | mm | 110 |
| Hydraulic ejection force | kN | 38 |
| POWER UNIT | ||
| Pump motor | kW | 11 |
| Heating capacity | kW | 12.7 |
| GENERAL | ||
| Oil tank capacity | L | 150 |
Robot Installation
Platen Dimension
Machine Dimmension
| # | Value |
|---|---|
| A | 4740 mm |
| B | 2500 mm |
| C | 510 mm |
| D | 305 mm |
| E | 60 mm |
| F | 1470 mm |
| G | 1925 mm |
| H | 1925 mm |
| I | 684 mm |
| J | 1830 mm |
| K | 3515 mm |
| L | 1530 mm |
| M | 820 mm |
| N | 860 mm |
| O | 1350 mm |
What Would be The Expectable Cycle Time In Production of 120ml Temper Evidence Cups With All Machineries Made In China?
With the advancement of technology, the injection machineries and automation solutions made in China are doing a much better job in thin-wall IML containers production. As for the production 120ml temper evidence cups for Yogurts, the best cycle time in a trial IML production of 6 cavities application with SWITEK SW8 Series IML robot and YIZUMI P380K3 high speed injection molding machine, the cycle time had been reduced to around 5.5s. Take the overall investment into consideration, it's an amazing bargin for the thin-wall IML containers producers in any world.
Hot Injection Automation News
E-mail: sales@switek.biz
Contact Blogger
sales06@switek.biz
+86 186 5927 5869
DongGuan, GuangDong, China
