U158TS -- Sonly High Energy Saving High Precision Servo Injection Molding Machine Made In China

Description	Unit	Value
Shot volume	cm³	288
Shot weight	g	262
Shot speed	mm/s	208
Screw diameter	mm	40
Injection pressure	MPa	192
Screw L:D ratio	--	23.1
CLAMPING UNIT
Clamping force	kN	1580
Opening Stroke	mm	395
Space between tie bars	mm x mm	430 x 430
Mold thickness(min)	mm	140
Mold thickness(max)	mm	450
Hydraulic ejection stroke	mm	115
Hydraulic ejection force	kN	38
POWER UNIT
Pump motor	kW	15
Heating capacity	kW	13.2
GENERAL
Oil tank capacity	L	200

Description

Unit

Value

INJECTION UNIT

Shot volume

cm³

288

Shot weight

262

Shot speed

mm/s

208

Screw diameter

Injection pressure

MPa

192

Screw L:D ratio

23.1

CLAMPING UNIT

Clamping force

1580

Opening Stroke

395

Space between tie bars

mm x mm

430 x 430

Mold thickness(min)

140

Mold thickness(max)

450

Hydraulic ejection stroke

115

Hydraulic ejection force

POWER UNIT

Pump motor

Heating capacity

13.2

GENERAL

Oil tank capacity

200

Robot Installation

Platen Dimension

Machine Dimmension

#	Value
A	5040 mm
B	2740 mm
C	590 mm
D	355 mm
E	60 mm
F	1580 mm
G	2225 mm
H	2225 mm
I	724 mm
J	2020 mm
K	3925 mm
L	1650 mm
M	880 mm
N	920 mm
O	1350 mm

Q & A

Why is HMD270M8SPV One of the Best High Speed Hydraulic Injection Molding Machine for Small Size Containers IML Production?

As one of the best buy high speed hydraulic injection molding machine for thin-wall containers made in China, HMD270M8SPV is no doubt one an excellent injection molding machine for thin-wall containers high speed production. As the star injection molding machine by HMD group, HMD270M8SPV has the advangates below:

Improved platen with high rigidity structure, especially suitable for thin-wall containers IML production.
Parallel movement and high-speed/low pressure injection movement that shortens circle time, especially for thin wall products IML production.
High-speed hydraulic motor.
Opening stroke up to 560mm, suitable for the IML productions of containers with height up to 136mm.
Injection speed up to 368mm/s, with possible of a cycle time of IML production lower to 2s.

To match the excellent injection speed of HMD270M8SPV, the best IML robot would be SWITEK high speed side entry IML Robot SW833, with the control system by the European automation control system supplier SigmaTek, the dry cycle time of the IML robot can be lower than 2.1s, which will perfecctly match the productivity of HMD270M8SPV.

U150TS-A Servo Injection Molding Machine

Machine Specification

Machine Dimension

Q & A