sales06@switek.biz
+86 186 5927 5869
Subscribe to Us
sales06@switek.biz
+86 186 5927 5869
Subscribe to Us
| Description | Unit | Value |
|---|---|---|
| INJECTION UNIT | ||
| Shot volume | cm3 | 314 |
| Shot weight | g | 285 |
| Shot speed | mm/s | 208 |
| Screw diameter | mm | 40 |
| Injection pressure | MPa | 191 |
| Screw L:D ratio | -- | 24.8 |
| CLAMPING UNIT | ||
| Clamping force | kN | 1680 |
| Opening Stroke | mm | 425 |
| Space between tie bars | mm x mm | 467 x 467 |
| Mold thickness(min) | mm | 170 |
| Mold thickness(max) | mm | 500 |
| Hydraulic ejection stroke | mm | 130 |
| Hydraulic ejection force | kN | 38 |
| POWER UNIT | ||
| Pump motor | kW | 15 |
| Heating capacity | kW | 13.2 |
| GENERAL | ||
| Oil tank capacity | L | 210 |
Robot Installation
Platen Dimension
Machine Dimmension
| # | Value |
|---|---|
| A | 5250 mm |
| B | 2740 mm |
| C | 565 mm |
| D | 370 mm |
| E | 60 mm |
| F | 1660 mm |
| G | 1100 mm |
| H | 1190 mm |
| I | 724 mm |
| J | 2030 mm |
| K | 4070 mm |
| L | 17200 mm |
| M | 920 mm |
| N | 960 mm |
| O | 1400 mm |
SumitomoSHIDEMAG, will onshow their two tone injection molding machine SE400HS-CI at booth # 11G41 with a production demo of automtive inner decorating parts.
Also they'll on show their SE180EV-A with a demo production of wireless cover by the technology of IMR (In-Mould Decoration by Roller), whichi is a 1 cavities injection solution with the part weight 10g and total cycle of 25s to show the precision injection performance of Sumitomo SE180EV-A in the production of ABS parts.
Turn-key IML Solutions
Turn-key Pipe Fittings Injection Automation Solutions
Turn-key Cutlery Packing Automation Solutions
High Performance Injection Robot
ไอเอ็มแอล เทคโนโลยี เอ็กซ์เพรส
ENGEL On Show 4+4 Stack Mould Box Side Entry IML Solutions
Chinaplas 2024 -- WELLTEC Machinery Will On Show New All Electric Injection Molding Machine at Booth #5.1D42
SWITEK Finished the Inhouse Testing of Turn-key 2 Cavities Lids IML Solutions
SWITEK Automation Started Up Its Dual Heads Pipe Fittings In Mold Insertion System Custom Made for LESSO Group
Chinapals 2023 | HMD Working with SWITEK for Higher Speed IML Solutions for Lids
FCS Servo Injection Molding Machine SA-330P Disposable Tableware Injection Production Solutions
K-2022, Yizumi On Show Turn-key IML Solution with High Speed All Electric Injection Molding Machine P250E
Lisiong New PVC Special Injection Molding Machine LS220PVC Installed for Commander Box Production
FCS Machinery Showcased Top Entry IML Solution by All Electric Injection Molding Machine
India Customer is Testing Their New IML System of 2 Cavities 1L Bucket
Contact SWITEK IML
sales06@switek.biz
+86 186 5927 5869
DongGuan, GuangDong, China
HuangYanZheng©Copy Right
