U178TS -- Sonly High Energy Saving High Precision Servo Injection Molding Machine Made In China

Description	Unit	Value
INJECTION UNIT
Shot volume	cm³	593
Shot weight	g	540
Shot speed	mm/s	196
Screw diameter	mm	55
Injection pressure	MPa	152
Screw L:D ratio	--	19.2
CLAMPING UNIT
Clamping force	kN	1780
Opening Stroke	mm	450
Space between tie bars	mm x mm	485 x 465
Mold thickness(min)	mm	180
Mold thickness(max)	mm	520
Hydraulic ejection stroke	mm	130
Hydraulic ejection force	kN	70
POWER UNIT
Pump motor	kW	19
Heating capacity	kW	16.3
GENERAL
Oil tank capacity	L	220

Robot Installation

Platen Dimension

Machine Dimmension

#	Value
A	5900 mm
B	3000 mm
C	595 mm
D	370 mm
E	60 mm
F	1750 mm
G	1100 mm
H	1150 mm
I	724 mm
J	2100 mm
K	4220 mm
L	1740 mm
M	950 mm
N	990 mm
O	1430 mm

SWITEK finished the in house testing of two cavities juice extractor cover top entry IML system for the production of juice extractor covery by the technology of IML.

The new system is an economic solution for thick wall products IML production. With SWITEK 3 axis servo injection robot SW7312DS as the core injection robot to finish the process of label picking, insertion, parts picking, the cost of the top entry IML solutions is much lower than its side entry counter parts.

The tips for a top entry IML solutions:

To ensure that the robot has sufficient payload, it's the core of a stable IML system
To ensure that the mould design is friendly to IML production. The mould structure for IML is different from the mould for parts of non-IML, an excellent mould design is the key to a successful IML system.
A top entry IML system is only suitable for a low speed system. Because a top entry IML system request that the 3 axis servo robot to do all the label picking, inserting, parts picking and droping of an IML system, it'll request a much longer in mold time compared to its counter part.

Turn-key IML Solutions