sales06@switek.biz
+86 186 5927 5869
Subscribe to Us
sales06@switek.biz
+86 186 5927 5869
Subscribe to Us
| Description | Unit | Value |
|---|---|---|
| INJECTION UNIT | ||
| Shot volume | cm3 | 569 |
| Shot weight | g | 419 |
| Shot speed | mm/s | 180 |
| Screw diameter | mm | 50 |
| Injection pressure | MPa | 184 |
| Screw L:D ratio | -- | 22 |
| CLAMPING UNIT | ||
| Clamping force | kN | 2180 |
| Opening Stroke | mm | 500 |
| Space between tie bars | mm x mm | 510 x 510 |
| Mold thickness(min) | mm | 200 |
| Mold thickness(max) | mm | 530 |
| Hydraulic ejection stroke | mm | 150 |
| Hydraulic ejection force | kN | 70 |
| POWER UNIT | ||
| Pump motor | kW | 19 |
| Heating capacity | kW | 16.3 |
| GENERAL | ||
| Oil tank capacity | L | 230 |
Robot Installation
Platen Dimension
Machine Dimmension
| # | Value |
|---|---|
| A | 6000 mm |
| B | 3270 mm |
| C | 650 mm |
| D | 405 mm |
| E | 60 mm |
| F | 1900 mm |
| G | 1330 mm |
| H | 1340 mm |
| I | 764 mm |
| J | 2200 mm |
| K | 4690 mm |
| L | 1840 mm |
| M | 1010 mm |
| N | 1050 mm |
| O | 1470 mm |
Arburg show cased its all electric injection molding machine "ULTIMATE ALL AROUNDER 720A" with a 4 cavities thin-wall cups IML solution at the total cycle time of 3.95second.
The new all electric packaging machine can produce IML thin-wall cups with a wall thickness of just 0.37 millimetres. Besides this, a variety of new technic applied to the new system. Driven with all-electric and working in combination with injection compression moulding, the energy footprint could be improved by 20 percent and the component weight has dropped significantly from 13 to 10.8grams. With the special "next Cycle IML" technology, the label on the IML product can be completely separated from the cup's PP during recycling.
Turn-key IML Solutions
Turn-key Pipe Fittings Injection Automation Solutions
Turn-key Cutlery Packing Automation Solutions
High Performance Injection Robot
ไอเอ็มแอล เทคโนโลยี เอ็กซ์เพรส
Chinaplas 2024 -- Lanson Machinery Will Showcase New GE Series All Electric Injection Molding Machine at Booth #2.1F142
Robin Dean, the CEO of Trade Group, Shared Her Opinions About NPE 2024
SWITEK New 4 Cavities Rectangular Box Side Entry IML System Started Up for Production in India
ChenHsong Launched Its New SPEED-PACK II High Speed Injection Molding Machine in Kshow 2022 for the Packaging Market
Hwamda Machinery New High Speed Injection Robot HMD 320M8 Started Up in a Pail Production Project
Welltec Machinery Installed Their New Injection Molding Machine 1400JSEII In India for the Production of Air Conditioner House
Hwamda Machinery New Two Platen Injection Molding Machine HMD DU2100 Started Up in A Large Size Dustin Project Without Robot
NPE 2024 -- WITTMANN On Show Solutions to Demonstrate "IT's All WITTMANN
Sumitomo (SHI) Demag Showcased 1.8 Seconds IML Solutions with Their New El-Exis SP 200-920 Hybrid Injection Molding Machine
HQ Mould Showcase 4 Cavities Lids IML Production at Chinaplas 2023
Contact SWITEK IML
sales06@switek.biz
+86 186 5927 5869
DongGuan, GuangDong, China
HuangYanZheng©Copy Right
