U300TS -- Sonly High Energy Saving High Precision Servo Injection Molding Machine Made In China

Description	Unit	Value
INJECTION UNIT
Shot volume	cm³	1003
Shot weight	g	913
Shot speed	mm/s	189
Screw diameter	mm	60
Injection pressure	MPa	168
Screw L:D ratio	--	22
CLAMPING UNIT
Clamping force	kN	3000
Opening Stroke	mm	590
Space between tie bars	mm x mm	610 x 585
Mold thickness(min)	mm	200
Mold thickness(max)	mm	640
Hydraulic ejection stroke	mm	150
Hydraulic ejection force	kN	70
POWER UNIT
Pump motor	kW	30
Heating capacity	kW	24.7
GENERAL
Oil tank capacity	L	400

Robot Installation

Platen Dimension

Machine Dimmension

#	Value
A	6860 mm
B	3560 mm
C	735 mm
D	390 mm
E	60 mm
F	2050 mm
G	1560 mm
H	1465 mm
I	845 mm
J	2460 mm
K	4920 mm
L	2050 mm
M	1160 mm
N	1210 mm
O	1650 mm

SWITEK finished the in house testing of two cavities juice extractor cover top entry IML system for the production of juice extractor covery by the technology of IML.

The new system is an economic solution for thick wall products IML production. With SWITEK 3 axis servo injection robot SW7312DS as the core injection robot to finish the process of label picking, insertion, parts picking, the cost of the top entry IML solutions is much lower than its side entry counter parts.

The tips for a top entry IML solutions:

To ensure that the robot has sufficient payload, it's the core of a stable IML system
To ensure that the mould design is friendly to IML production. The mould structure for IML is different from the mould for parts of non-IML, an excellent mould design is the key to a successful IML system.
A top entry IML system is only suitable for a low speed system. Because a top entry IML system request that the 3 axis servo robot to do all the label picking, inserting, parts picking and droping of an IML system, it'll request a much longer in mold time compared to its counter part.

Turn-key IML Solutions