U400TS -- Sonly High Energy Saving High Precision Servo Injection Molding Machine Made In China

Description	Unit	Value
Shot volume	cm³	1661
Shot weight	g	1512
Shot speed	mm/s	144
Screw diameter	mm	75
Injection pressure	MPa	156
Screw L:D ratio	--	22
CLAMPING UNIT
Clamping force	kN	4000
Opening Stroke	mm	710
Space between tie bars	mm x mm	745 x 705
Mold thickness(min)	mm	240
Mold thickness(max)	mm	750
Hydraulic ejection stroke	mm	170
Hydraulic ejection force	kN	90
POWER UNIT
Pump motor	kW	37
Heating capacity	kW	33.6
GENERAL
Oil tank capacity	L	700

Description

Unit

Value

INJECTION UNIT

Shot volume

cm³

1661

Shot weight

1512

Shot speed

mm/s

144

Screw diameter

Injection pressure

MPa

156

Screw L:D ratio

CLAMPING UNIT

Clamping force

4000

Opening Stroke

710

Space between tie bars

mm x mm

745 x 705

Mold thickness(min)

240

Mold thickness(max)

750

Hydraulic ejection stroke

170

Hydraulic ejection force

POWER UNIT

Pump motor

Heating capacity

33.6

GENERAL

Oil tank capacity

700

Robot Installation

Platen Dimension

Machine Dimmension

#	Value
A	7440 mm
B	3900 mm
C	70 mm
D	510 mm
E	60 mm
F	200 mm
G	775 mm
H	775 mm
I	775 mm
J	1195 mm
K	300 mm
L	1365 mm
M	1525 mm
N	200 mm
O	60 mm
P	840 mm

Q & A

Why There's An Additional Static Charge Ring Installed to Some IML System?

For visitors of SWITEKK website will find that for the IML system no matter if it's side entry IML robot or Top Entry IML Robot, you can see a ring just outside the mold area in some of the IML system but not to the other IML system. Why would it happen and what's the function of this ring to the IML system?

The ring installed is a static charging ring. For a better understanding of the function of this static charging ring we'll need to know the types of the labels which we're using in an IML project. For an IML container made from PP (Polypropylene) there're two main types of IML labels, the regular material IML labels which could be easily static charged from the inner side of the label and the metallic label of which has a metallic layer will releas the static immediately. In this case we'll need to have the label static charged from outside of the label. That's why an extra static charging ring is to be installed to the IML system to ensure that the metallic IML label could be well static charged.

For more knowledge about IML and IML solutions just follow up https://www.gechiml.com for the up to date solutions of IML from SWITEK automation and contact Adams for a turn-key solutions of IML.

U400TS- B Servo Injection Molding Machine

Machine Specification

Machine Dimension

Q & A