sales06@switek.biz
+86 186 5927 5869
sales06@switek.biz
+86 186 5927 5869
| Description | Unit | Value |
|---|---|---|
| INJECTION UNIT | ||
| Shot volume | cm3 | 1965 |
| Shot weight | g | 1788 |
| Shot speed | mm/s | 152 |
| Screw diameter | mm | 80 |
| Injection pressure | MPa | 168 |
| Screw L:D ratio | -- | 23.4 |
| CLAMPING UNIT | ||
| Clamping force | kN | 5080 |
| Opening Stroke | mm | 775 |
| Space between tie bars | mm x mm | 805 x 715 |
| Mold thickness(min) | mm | 290 |
| Mold thickness(max) | mm | 800 |
| Hydraulic ejection stroke | mm | 225 |
| Hydraulic ejection force | kN | 152 |
| POWER UNIT | ||
| Pump motor | kW | 45 |
| Heating capacity | kW | 38.3 |
| GENERAL | ||
| Oil tank capacity | L | 900 |
Robot Installation
Platen Dimension
Machine Dimmension
| # | Value |
|---|---|
| A | 7800 mm |
| B | 4135 mm |
| C | 75 mm |
| D | 520 mm |
| E | 60 mm |
| F | 220 mm |
| G | 720 mm |
| H | 1000 mm |
| I | 1000 mm |
| J | 1245 mm |
| K | 300 mm |
| L | 1530 mm |
| M | 1730 mm |
| N | 220 mm |
| O | 60 mm |
| P | 880 mm |
Will Hybrid An Ideal Injection Molding Machine for IML Project?
Hybrid injection molding machine, a combination of the all electric injection molding machine and the hydraulic injection molding machine, it's no doubt one of the best injection molding machine for your IML project. A hybrid injection molding machine will have the precision of plastic injection also the much lower cost against the all electric injection molding machine.
One of the best buy hybrid injection molding machine made in China is the LDY series of hybrid injection molding machine made by Haida, one of the injection molding machine manufacturer founded in 1992 and is famous for the reliability of the injection molding machines. The LDY series of hybrid injection molding machine is their key products for thin-wall container production markets with a clamping force ranging from 100~420T.
For your IML project, the best IML robot to match Haida LDY series hybrid injection molding machine would be SWITEK SW8 Series IML robot, with control systems by European system provider SigmaTek, the cycle time of SW8 series of IML robot can reach 2.0s for the IML production of small size thin-wall containers or lids. It's one of the fastest IML robot made in China.
Hot Injection Automation News
E-mail: sales@switek.biz
Contact Blogger
sales06@switek.biz
+86 186 5927 5869
DongGuan, GuangDong, China
