ZE3000F/1400-- Zhafir All Electric Haitian High Speed Injection Molding Machine and IML Application

Description	Unit	Value
INJECTION UNIT
Shot volume	cm³	862
Shot weight	g	0
Shot speed	mm/s	350
Screw diameter	mm	65
Injection pressure	MPa	164
Screw L:D ratio	--	25
CLAMPING UNIT
Clamping force	kN	3000
Opening Stroke	mm	600
Space between tie bars	mm x mm	670 x 670
Mold thickness(min)	mm	250
Mold thickness(max)	mm	650
Hydraulic ejection stroke	mm	160
Hydraulic ejection force	kN	69
POWER UNIT
Pump motor	kW	207
Heating capacity	kW	0
GENERAL
Oil tank capacity	L	135

Robot Installation

Platen Dimension

Machine Dimmension

#	Value
A	7823 mm
B	1614 mm
C	610 mm
D	251 mm
E	2095 mm
F	4 x M10 L20
G	115 mm
H	149 mm
J	φ80 mm
K	115 mm
L	184 mm
M	φ4 mm
N	SR10

SWITEK finished the in house testing of two cavities juice extractor cover top entry IML system for the production of juice extractor covery by the technology of IML.

The new system is an economic solution for thick wall products IML production. With SWITEK 3 axis servo injection robot SW7312DS as the core injection robot to finish the process of label picking, insertion, parts picking, the cost of the top entry IML solutions is much lower than its side entry counter parts.

The tips for a top entry IML solutions:

To ensure that the robot has sufficient payload, it's the core of a stable IML system
To ensure that the mould design is friendly to IML production. The mould structure for IML is different from the mould for parts of non-IML, an excellent mould design is the key to a successful IML system.
A top entry IML system is only suitable for a low speed system. Because a top entry IML system request that the 3 axis servo robot to do all the label picking, inserting, parts picking and droping of an IML system, it'll request a much longer in mold time compared to its counter part.

Turn-key IML Solutions