| Description | Unit | Value |
|---|---|---|
| INJECTION UNIT | ||
| Shot volume | cm3 | 617 |
| Shot weight | g | 0 |
| Shot speed | mm/s | 160 |
| Screw diameter | mm | 55 |
| Injection pressure | MPa | 230 |
| Screw L:D ratio | -- | 25 |
| CLAMPING UNIT | ||
| Clamping force | kN | 3000 |
| Opening Stroke | mm | 600 |
| Space between tie bars | mm x mm | 670 x 670 |
| Mold thickness(min) | mm | 250 |
| Mold thickness(max) | mm | 650 |
| Hydraulic ejection stroke | mm | 160 |
| Hydraulic ejection force | kN | 69 |
| POWER UNIT | ||
| Pump motor | kW | 168 |
| Heating capacity | kW | 0 |
| GENERAL | ||
| Oil tank capacity | L | 135 |
Robot Installation
Platen Dimension
Machine Dimmension
| # | Value |
|---|---|
| A | 7823 mm |
| B | 1614 mm |
| C | 610 mm |
| D | 251 mm |
| E | 2095 mm |
| F | 4 x M10 L20 |
| G | 115 mm |
| H | 149 mm |
| J | φ80 mm |
| K | 115 mm |
| L | 184 mm |
| M | φ4 mm |
| N | SR10 |
Fakuma 2024, Nestal on show their 175T all electric inection molding machine with a turn-key IML solution of Emmi cups of which the IML robot provided by BECK automation.
Elion is an all electric injection molding machine by Nestal for the high precision parts injection. The combination of Nestal Elion 1750 and BECK IML robot will provide the Emmi cups producers an efficient solution of high quality cups IML solutions. As an injection molding machine created in 1875, Nestal Elion all electric injection molding machine is a representative of high precision, high speed and high performance injection molding machine.
For a lower budget IML project, it's possible to have SWITEK high performance side entry IML Robot SW833 as an optional solution of the BECK IML robot. As the one of the leading IML Solutions provider in China, SWITEK side entry IML robot SW833 had been one of the best buy IML robot in China and is providing solutions of IML containers for clients from 40+ countries and districts.
Turn-key IML Solutions
Turn-key Pipe Fittings Injection Automation Solutions
Turn-key Cutlery Packing Automation Solutions
High Performance Injection Robot
ไอเอ็มแอล เทคโนโลยี เอ็กซ์เพรส
FCS Released Its All-Electric Two Components Injection Molding Machine With a Production Demo of Air Tight Container
SWITEK Automation 3 axis servo injection robot 16 Cavities elbow PVC pipe fittings runner cutting system put in production.
FCS High Speed Hydraulic Injection Molding Machine 32 Cavities Blood Vessel Injection Production Solutions.
Chinaplas 2023 | Lisong Will Onshow Their New All Electric Injection Molding Machine
YIZUMI Will Showcase Their New All Electric Injection Molding Machine FF240M at IPF Japan 2023 from Nov.28~Dec.2 at Booth # 4-42610
Haitian Group New JUPITER Series Two Platen Injection Molding Machine JU18500III Installed for EIPP Production
The Assembly of SWITEK New IML Robot for Wrap + Bottom Labeling Finished
Fakuma 2023 -- ENGEL on Show their All Electric Injection Molding Machine with Turn-key IML Solutions
New PVC Pipe Fittings Runner Cutting System Was Installed In the Factory of LESSO Group-- The World Largest Pipe Fittings Manufacturer
Roboplas Top Entry IML Robot Installed 1 Cavity Pail
Contact SWITEK IML
sales06@switek.biz
+86 186 5927 5869
DongGuan, GuangDong, China
HuangYanZheng©Copy Right