| Description | Unit | Value |
|---|---|---|
| INJECTION UNIT | ||
| Shot volume | cm3 | 735 |
| Shot weight | g | 0 |
| Shot speed | mm/s | 160 |
| Screw diameter | mm | 60 |
| Injection pressure | MPa | 193 |
| Screw L:D ratio | -- | 25 |
| CLAMPING UNIT | ||
| Clamping force | kN | 3000 |
| Opening Stroke | mm | 600 |
| Space between tie bars | mm x mm | 670 x 670 |
| Mold thickness(min) | mm | 250 |
| Mold thickness(max) | mm | 650 |
| Hydraulic ejection stroke | mm | 160 |
| Hydraulic ejection force | kN | 69 |
| POWER UNIT | ||
| Pump motor | kW | 168 |
| Heating capacity | kW | 0 |
| GENERAL | ||
| Oil tank capacity | L | 135 |
Robot Installation
Platen Dimension
Machine Dimmension
| # | Value |
|---|---|
| A | 7823 mm |
| B | 1614 mm |
| C | 610 mm |
| D | 251 mm |
| E | 2095 mm |
| F | 4 x M10 L20 |
| G | 115 mm |
| H | 149 mm |
| J | φ80 mm |
| K | 115 mm |
| L | 184 mm |
| M | φ4 mm |
| N | SR10 |
SA-330P is a servo hydraulic energy-saving injection molding machine by FCS Machinery which is suitable for the production of bucket container. This series of injection molding machine have a clamping force range from 220Tons ~ 1000Tons. In the video FCS is trying the production of disposable tablewares.
For the production of disposable tableware, there're a couple of solutions. The basic automatio solution would be to pick the table wares out with a high speed 3 axis injection robot SW7112DS; You can also choose to have it Single PCS Packed or have it Bag Packed or Box packed. With more than 17 years cooperating with the mold maker and injection molding machine manufacturers, SWITEK is experienced to provide you with a turn-key disposable tableware injection production solutions.
Turn-key IML Solutions
Turn-key Pipe Fittings Injection Automation Solutions
Turn-key Cutlery Packing Automation Solutions
High Performance Injection Robot
ไอเอ็มแอล เทคโนโลยี เอ็กซ์เพรส
Fakuma 2024 is Opening on 15 October, 2024 at Friedrichshafen, Germany
Chinaplas 2024 -- Sumitomo Demag will On Show New All Electric Injection Molding Machine at Booth#4.1C32
Robin Dean, the CEO of Trade Group, Shared Her Opinions About NPE 2024
Chinaplas 2024 -- PowerJet Will On Show New Injection Molding Machine and Blow Molding Machine at Booth #4.1D64
Roboplase Released IML Solutions with Vision Control at Eurasia 2014
NingBo LK Technology Co., Ltd. New Two Platen Injection Molding Machine FA2500 Installed for Plastic Pallet Production
Chinaplas 2024 is Opening Soon, Are You Ready?
Sumitomo (SHI) Demag Demonstrated Their New Hybrid Injection Molding Machine EL-Exis SP 250-920 with a Fast Cycle IML Production
Chinaplas 2023 | Yizumi will Demo LED Bead Molding Solution with New All Electric Injection Molding Macine FF200
Lisong Machinery Is Testing Their New High Speed Hydraulic Injection Molding Machine With a 4 Cavities Lids Side Entry IML Solution
Contact SWITEK IML
sales06@switek.biz
+86 186 5927 5869
DongGuan, GuangDong, China
HuangYanZheng©Copy Right