| Description | Unit | Value |
|---|---|---|
| INJECTION UNIT | ||
| Shot volume | cm3 | 929 |
| Shot weight | g | 0 |
| Shot speed | mm/s | 350 |
| Screw diameter | mm | 65 |
| Injection pressure | MPa | 196 |
| Screw L:D ratio | -- | 25 |
| CLAMPING UNIT | ||
| Clamping force | kN | 3800 |
| Opening Stroke | mm | 700 |
| Space between tie bars | mm x mm | 770 x 770 |
| Mold thickness(min) | mm | 300 |
| Mold thickness(max) | mm | 710 |
| Hydraulic ejection stroke | mm | 160 |
| Hydraulic ejection force | kN | 69 |
| POWER UNIT | ||
| Pump motor | kW | 249 |
| Heating capacity | kW | 0 |
| GENERAL | ||
| Oil tank capacity | L | 135 |
Robot Installation
Platen Dimension
Machine Dimmension
| # | Value |
|---|---|
| A | 8216 mm |
| B | 1754 mm |
| C | 610 mm |
| D | 250 mm |
| E | 2095 mm |
| F | 4 x M10 L20 |
| G | 115 mm |
| H | 148 mm |
| J | φ80 mm |
| K | 115 mm |
| L | 217 mm |
| M | φ4 mm |
| N | SR10 |
Arge top entry IML robot installed for the production of IML pails with parts dropped freely.
The ARGE top entry IML robot for pail IML production is a price smart solution to have the pails produced in a smaller injection molding machine but have the finished parts free dropped. Since the production of an IML pails request the robots to pick the parts and place the label synchronous or asynchronously, it request a much wider opening stroke of the injection molding machine compared the producton of unlabeled bucket. But the asynchronous two steps system will increase the in mold time. A top entry solution with the IML pails free dropped would be a compromise of the production efficiency and the parts quality.
Anyway, for a top entry IML robot for pail buckets IML production, an asynchronous two steps IML system is a much more popular solution which will well balance the productivity and quality of the IML system.
Turn-key IML Solutions
Turn-key Pipe Fittings Injection Automation Solutions
Turn-key Cutlery Packing Automation Solutions
High Performance Injection Robot
ไอเอ็มแอล เทคโนโลยี เอ็กซ์เพรส
Welltec Machinery PVC Special Injection Molding Machine Had Been Well Installed For Production
Hwamda Machinery New Two Platen Injection Molding Machine HMD DU2100 Started Up in A Large Size Dustin Project Without Robot
Powerjet Showcased High Speed Injection Molding Machine KF398-S8 with KOWEY IML Solution at Chinaplas 2021
Haida Machinery Launched Their New Hybrid Injection Molding Machine DC3600 In Chinaplas2023 with a 2 Cavities 1000ml Buckets Side Entry IML Solutions.
Milacron Showcased Co-Injection Technology of 2 Cavities 20L IML Pails at NPE 2024
Chinaplas 2023 | Lisong Will Onshow Their New All Electric Injection Molding Machine
Lisong Machinery Started Its New High Speed Injection Molding Machine LS288G6 Up with a 32 Cavities Spoons Injection Solutions
China IML System Proivder | Guang Dong Switke Technology Co., Ltd.
Chinaplas 2024 -- UVIA On Show All Electric Injection Molding Machine with CHUANY IML Robot
Roboplas onshow 1 cavity cup top entry IML Solution at K2022 by Arburg Allround all electric injection molding machine.
Contact SWITEK IML
sales06@switek.biz
+86 186 5927 5869
DongGuan, GuangDong, China
HuangYanZheng©Copy Right