| Description | Unit | Value |
|---|---|---|
| INJECTION UNIT | ||
| Shot volume | cm3 | 791 |
| Shot weight | g | 0 |
| Shot speed | mm/s | 350 |
| Screw diameter | mm | 60 |
| Injection pressure | MPa | 230 |
| Screw L:D ratio | -- | 25 |
| CLAMPING UNIT | ||
| Clamping force | kN | 4500 |
| Opening Stroke | mm | 800 |
| Space between tie bars | mm x mm | 770 x 770 |
| Mold thickness(min) | mm | 400 |
| Mold thickness(max) | mm | 820 |
| Hydraulic ejection stroke | mm | 180 |
| Hydraulic ejection force | kN | 98 |
| POWER UNIT | ||
| Pump motor | kW | 249 |
| Heating capacity | kW | 0 |
| GENERAL | ||
| Oil tank capacity | L | 280 |
Robot Installation
Platen Dimension
Machine Dimmension
| # | Value |
|---|---|
| A | 8796 mm |
| B | 1754 mm |
| C | 610 mm |
| D | 250 mm |
| E | 2135 mm |
| F | 4 x M10 L20 |
| G | 115 mm |
| H | 148 mm |
| J | φ80 mm |
| K | 115 mm |
| L | 217 mm |
| M | φ4 mm |
| N | SR10 |
The new FORZA series two platen injection molding machine FA1400 by Ningbo LK Technology Co., Ltd. was installed for the production of plastic chairs with robot picking.
For furniture production it's demanding on the surface of the parts with novelty design. With precise injection the new FORZA series two platen injecdtion molding machine FA1400 can produce the perfac injection surface to meet the stringent requirements in furniture production. With a heavy duty injection robot to provide a turn-key plastic chairs production to customer.
For an injection molding machine of 1400T clamping force, an injection robot with a payload of 15kg would be sufficient for the parts picking. The robot for this application would be SWITEK 3 axis servo injection robot SW7518DS which has a payload of 15kg and is suitable for injection molding machine 650~1800T.
Turn-key IML Solutions
Turn-key Pipe Fittings Injection Automation Solutions
Turn-key Cutlery Packing Automation Solutions
High Performance Injection Robot
ไอเอ็มแอล เทคโนโลยี เอ็กซ์เพรส
Haida Finished the Injection Cycle of 26s in An IML Production of A 33L Paint Bucket with Its HD700U & SWITEK IML Robot SW850
Fakuma 2023 -- ENGEL on Show their All Electric Injection Molding Machine with Turn-key IML Solutions
Switek Finished the Testing of 6 Cavities Yogurt Cups Side Entry IML System with Yizumi PAC380K
India Customer is Testing Their New IML System of 2 Cavities 1L Bucket
Robin Dean, the CEO of Trade Group, Shared Her Opinions About NPE 2024
Chinaplas2024 -- Wittmann Will Show Up New Robotic Technology at Booth#4.1D41
What Would be the Reaction of a First-Timers Who is Visiting NPE 2024 for the First Time
SWITEK Automation Started Up Its Dual Heads Pipe Fittings In Mold Insertion System Custom Made for LESSO Group
ARGE Side Entry IML System for 1200cc Buckets In Production with BMBKW28 Injection Molding Machine
Eurasia Robotic 6 Cavities IML Solutions with Vision Control
Contact SWITEK IML
sales06@switek.biz
+86 186 5927 5869
DongGuan, GuangDong, China
HuangYanZheng©Copy Right