사출 성형기

설명	단위	값
샷 볼륨	cm³	3810
샷 무게	g	3429
샷 속도	mm/s	148
나사 직경	mm	105
사출압력	MPa	125
나사 L:D 비율	--	18
클램핑 유닛
클램핑 력	kN	5300
오프닝 스트로크	mm	850
타이바 사이의 공간	mm x mm	840 x 830
금형 두께(min)	mm	300
금형 두께(max)	mm	850
유압 배출 스트로크	mm	240
유압 방출력	kN	166
전원 장치
펌프 모터	kW	352
난방능력	kW	35.73
일반적인
오일탱크 용량	L	700

설명

단위

값

주입 장치

샷 볼륨

cm³

3810

샷 무게

3429

샷 속도

mm/s

148

나사 직경

105

사출압력

MPa

125

나사 L:D 비율

클램핑 유닛

클램핑 력

5300

오프닝 스트로크

850

타이바 사이의 공간

mm x mm

840 x 830

금형 두께(min)

300

금형 두께(max)

850

유압 배출 스트로크

240

유압 방출력

166

전원 장치

펌프 모터

352

난방능력

35.73

일반적인

오일탱크 용량

700

#	Value
A	2244 mm
B	2005 mm
C	2495 mm
D	7846 mm
E	8995 mm
F	1809 mm
G	1900 mm
H	865 mm
I	800 mm
J	945 mm
K	950 mm

Value

2244 mm

2005 mm

2495 mm

7846 mm

8995 mm

1809 mm

1900 mm

865 mm

800 mm

945 mm

950 mm

Q & A

Why There's An Additional Static Charge Ring Installed to Some IML System?

For visitors of SWITEKK website will find that for the IML system no matter if it's side entry IML robot or Top Entry IML Robot, you can see a ring just outside the mold area in some of the IML system but not to the other IML system. Why would it happen and what's the function of this ring to the IML system?

The ring installed is a static charging ring. For a better understanding of the function of this static charging ring we'll need to know the types of the labels which we're using in an IML project. For an IML container made from PP (Polypropylene) there're two main types of IML labels, the regular material IML labels which could be easily static charged from the inner side of the label and the metallic label of which has a metallic layer will releas the static immediately. In this case we'll need to have the label static charged from outside of the label. That's why an extra static charging ring is to be installed to the IML system to ensure that the metallic IML label could be well static charged.

For more knowledge about IML and IML solutions just follow up https://www.gechiml.com for the up to date solutions of IML from SWITEK automation and contact Adams for a turn-key solutions of IML.

530SEIII - C servo 사출 성형기

기계 사양

기계 차원

Q & A