사출 성형기

설명	단위	값
샷 볼륨	cm³	4467
샷 무게	g	4020
샷 속도	mm/s	470
나사 직경	mm	110
사출압력	MPa	142
나사 L:D 비율	--	18
클램핑 유닛
클램핑 력	kN	7500
오프닝 스트로크	mm	1025
타이바 사이의 공간	mm x mm	1000 x 1000
금형 두께(min)	mm	350
금형 두께(max)	mm	1025
유압 배출 스트로크	mm	350
유압 방출력	kN	250
전원 장치
펌프 모터	kW	440
난방능력	kW	50
일반적인
오일탱크 용량	L	1500

설명

단위

값

주입 장치

샷 볼륨

cm³

4467

샷 무게

4020

샷 속도

mm/s

470

나사 직경

110

사출압력

MPa

142

나사 L:D 비율

클램핑 유닛

클램핑 력

7500

오프닝 스트로크

1025

타이바 사이의 공간

mm x mm

1000 x 1000

금형 두께(min)

350

금형 두께(max)

1025

유압 배출 스트로크

350

유압 방출력

250

전원 장치

펌프 모터

440

난방능력

일반적인

오일탱크 용량

1500

#	Value
A	2539 mm
B	2227 mm
C	2635 mm
D	4318 mm
E	4497 mm
F	10192 mm
G	1410 mm
H	2295 mm

Value

2539 mm

2227 mm

2635 mm

4318 mm

4497 mm

10192 mm

1410 mm

2295 mm

Q & A

Why There's An Additional Static Charge Ring Installed to Some IML System?

For visitors of SWITEKK website will find that for the IML system no matter if it's side entry IML robot or Top Entry IML Robot, you can see a ring just outside the mold area in some of the IML system but not to the other IML system. Why would it happen and what's the function of this ring to the IML system?

The ring installed is a static charging ring. For a better understanding of the function of this static charging ring we'll need to know the types of the labels which we're using in an IML project. For an IML container made from PP (Polypropylene) there're two main types of IML labels, the regular material IML labels which could be easily static charged from the inner side of the label and the metallic label of which has a metallic layer will releas the static immediately. In this case we'll need to have the label static charged from outside of the label. That's why an extra static charging ring is to be installed to the IML system to ensure that the metallic IML label could be well static charged.

For more knowledge about IML and IML solutions just follow up https://www.gechiml.com for the up to date solutions of IML from SWITEK automation and contact Adams for a turn-key solutions of IML.

750SEIII - C servo 사출 성형기

기계 사양

기계 차원

Q & A