사출 성형기

설명	단위	값
샷 볼륨	cm³	475
샷 무게	g	432
샷 속도	mm/s	517
나사 직경	mm	55
사출압력	MPa	182
나사 L:D 비율	--	25.3:1
클램핑 유닛
클램핑 력	kN	4280
오프닝 스트로크	mm	650
타이바 사이의 공간	mm x mm	720 x 660
금형 두께(min)	mm	300
금형 두께(max)	mm	700
유압 배출 스트로크	mm	160
유압 방출력	kN	77
전원 장치
펌프 모터	kW	110
난방능력	kW	28.5
일반적인
오일탱크 용량	L	450

설명

단위

값

주입 장치

샷 볼륨

cm³

475

샷 무게

432

샷 속도

mm/s

517

나사 직경

사출압력

MPa

182

나사 L:D 비율

25.3:1

클램핑 유닛

클램핑 력

4280

오프닝 스트로크

650

타이바 사이의 공간

mm x mm

720 x 660

금형 두께(min)

300

금형 두께(max)

700

유압 배출 스트로크

160

유압 방출력

전원 장치

펌프 모터

110

난방능력

28.5

일반적인

오일탱크 용량

450

#	Value
A	1949 mm
B	7705 mm
C	7785 mm
D	2481 mm
E	1958 mm

Value

1949 mm

7705 mm

7785 mm

2481 mm

1958 mm

Q & A

For Thin Wall Container IML Production, Will YIZUME P250E or P250K3 a Better Choice for Your Project?

As for which injection molding machine is a better choice for your IML project, it'll depends on your budget and requirement about the parts. As we know both P250E and P280K3 are excellent high speed injection molding machine designed for the injection production of thin wall containers with high injection speed for the fast injection of thin wall containers. They're no dobt excellent injection molding machine for your IML project. But, how to make a decision between?

Both P250E and P250K3 has similar injection speed (300/500 mm/s optional for P250E and 320mm/s for P250K3) but P250E is an all electric injection molding machine while P250K3 is a high speed hydraulic injection molding machine. Of course an all electric injection molding machine is a better choice for food container IML production, but, the cost of it would be much higher than P250K3. So, if your budget is sufficient, P250E, if not, P250K3 would be the right one for you.

The IML robot for YIZUMI P250K3/P250E would be SWITEK IML Robot SW833. In K2019 SWITEK IML robot SW833 work with P250E in demo of 4 cavities cups at the cycle time of 2.1s, this combination is one of the best IML solution for small size containers IML production.

HMD 428M8-SPV A highspeed 사출 성형기

기계 사양

기계 차원

Q & A