사출 성형기

설명	단위	값
샷 볼륨	cm³	452
샷 무게	g	411
샷 속도	mm/s	348
나사 직경	mm	50
사출압력	MPa	175
나사 L:D 비율	--	22
클램핑 유닛
클램핑 력	kN	2680
오프닝 스트로크	mm	550
타이바 사이의 공간	mm x mm	580 x 520
금형 두께(min)	mm	220
금형 두께(max)	mm	550
유압 배출 스트로크	mm	140
유압 방출력	kN	88
전원 장치
펌프 모터	kW	68
난방능력	kW	19.8
일반적인
오일탱크 용량	L	520

설명

단위

값

주입 장치

샷 볼륨

cm³

452

샷 무게

411

샷 속도

mm/s

348

나사 직경

사출압력

MPa

175

나사 L:D 비율

클램핑 유닛

클램핑 력

2680

오프닝 스트로크

550

타이바 사이의 공간

mm x mm

580 x 520

금형 두께(min)

220

금형 두께(max)

550

유압 배출 스트로크

140

유압 방출력

전원 장치

펌프 모터

난방능력

19.8

일반적인

오일탱크 용량

520

Special Features

Optimized Toggle Unit Design
Cam-ring Mechanism
Multistage Ejector
Larger Space for Mold
Large-sized Linear Guide Rail Support
The Advanced Control Interface
Closed-loop PID Temperature Controller
Efficient Injection Structure
Precise Linear Guide ail
Servo Motor and Drive
Injection Molding Machine for IML Solutions

Q & A

What is a Picking Robot?

A picking robot in an injection project is a robotic arm which will pick the parts from the mould and have it placed on the conveyor or other automation system to have another processing. The projector will choose a picking robot according to the size of the injection molding machine, the injection cycle time, the weight of the parts etc to choose a picking robot.

High Speed Picking Robot SW7112DS

Take the SWITEK hgih speed 3 axis servo robot SW7112DS as an example, with a pay load of 2kg and a dry cycle time of 3.3s only designed for injection molding machine ranging from 150Ton ~ 500Tone, it could be regarded as one of the best picking robot for the thin-wall containers production business with a picking capacity up to 8 cavities of 700ml cups, but if for the picking of a bumper it would not be suitable. Anyway, to choose a picking robot for your injection project, the key point would be:

The size of your injection molding machine
The weight of the parts and EOAT
The total injection cycle
The height from the floor to the crane

LS268/580G HighSpeed 사출 성형기

기계 사양

기계 차원

Q & A