사출 성형기

설명	단위	값
샷 볼륨	cm³	28486
샷 무게	g	26207
샷 속도	mm/s	100
나사 직경	mm	180
사출압력	MPa	125
나사 L:D 비율	--	21
클램핑 유닛
클램핑 력	kN	18500
오프닝 스트로크	mm	1680
타이바 사이의 공간	mm x mm	1620 x 1420
금형 두께(min)	mm	750
금형 두께(max)	mm	1550
유압 배출 스트로크	mm	400
유압 방출력	kN	363
전원 장치
펌프 모터	kW	186
난방능력	kW	95
일반적인
오일탱크 용량	L	1950

설명

단위

값

주입 장치

샷 볼륨

cm³

28486

샷 무게

26207

샷 속도

mm/s

100

나사 직경

180

사출압력

MPa

125

나사 L:D 비율

클램핑 유닛

클램핑 력

18500

오프닝 스트로크

1680

타이바 사이의 공간

mm x mm

1620 x 1420

금형 두께(min)

750

금형 두께(max)

1550

유압 배출 스트로크

400

유압 방출력

363

전원 장치

펌프 모터

186

난방능력

일반적인

오일탱크 용량

1950

Q & A

Why There's An Additional Static Charge Ring Installed to Some IML System?

For visitors of SWITEKK website will find that for the IML system no matter if it's side entry IML robot or Top Entry IML Robot, you can see a ring just outside the mold area in some of the IML system but not to the other IML system. Why would it happen and what's the function of this ring to the IML system?

The ring installed is a static charging ring. For a better understanding of the function of this static charging ring we'll need to know the types of the labels which we're using in an IML project. For an IML container made from PP (Polypropylene) there're two main types of IML labels, the regular material IML labels which could be easily static charged from the inner side of the label and the metallic label of which has a metallic layer will releas the static immediately. In this case we'll need to have the label static charged from outside of the label. That's why an extra static charging ring is to be installed to the IML system to ensure that the metallic IML label could be well static charged.

For more knowledge about IML and IML solutions just follow up https://www.gechiml.com for the up to date solutions of IML from SWITEK automation and contact Adams for a turn-key solutions of IML.

BL1850EKH/C35000-B Servo 사출 성형기

기계 사양

기계 차원

Q & A