사출 성형기

설명	단위	값
샷 볼륨	cm³	3533
샷 무게	g	3179
샷 속도	mm/s	123
나사 직경	mm	100
사출압력	MPa	143
나사 L:D 비율	--	19.8
클램핑 유닛
클램핑 력	kN	7200
오프닝 스트로크	mm	980
타이바 사이의 공간	mm x mm	970 x 920
금형 두께(min)	mm	400
금형 두께(max)	mm	950
유압 배출 스트로크	mm	280
유압 방출력	kN	210
전원 장치
펌프 모터	kW	84
난방능력	kW	50.9
일반적인
오일탱크 용량	L	900

설명

단위

값

주입 장치

샷 볼륨

cm³

3533

샷 무게

3179

샷 속도

mm/s

123

나사 직경

100

사출압력

MPa

143

나사 L:D 비율

19.8

클램핑 유닛

클램핑 력

7200

오프닝 스트로크

980

타이바 사이의 공간

mm x mm

970 x 920

금형 두께(min)

400

금형 두께(max)

950

유압 배출 스트로크

280

유압 방출력

210

전원 장치

펌프 모터

난방능력

50.9

일반적인

오일탱크 용량

900

Q & A

Why There's An Additional Static Charge Ring Installed to Some IML System?

For visitors of SWITEKK website will find that for the IML system no matter if it's side entry IML robot or Top Entry IML Robot, you can see a ring just outside the mold area in some of the IML system but not to the other IML system. Why would it happen and what's the function of this ring to the IML system?

The ring installed is a static charging ring. For a better understanding of the function of this static charging ring we'll need to know the types of the labels which we're using in an IML project. For an IML container made from PP (Polypropylene) there're two main types of IML labels, the regular material IML labels which could be easily static charged from the inner side of the label and the metallic label of which has a metallic layer will releas the static immediately. In this case we'll need to have the label static charged from outside of the label. That's why an extra static charging ring is to be installed to the IML system to ensure that the metallic IML label could be well static charged.

For more knowledge about IML and IML solutions just follow up https://www.gechiml.com for the up to date solutions of IML from SWITEK automation and contact Adams for a turn-key solutions of IML.

HXF720-C Servo 사출 성형기

기계 사양

기계 차원

Q & A