사출 성형기

JU10800III - 6730B Twoplaten 사출 성형기

기계 사양

설명	단위	값
주입 장치
샷 볼륨	cm³	3691
샷 무게	g	3359
샷 속도	mm/s	793
나사 직경	mm	100
사출압력	MPa	157
나사 L:D 비율	--	22
클램핑 유닛
클램핑 력	kN	10800
오프닝 스트로크	mm	1900
타이바 사이의 공간	mm x mm	1260 x 1100
금형 두께(min)	mm	500
금형 두께(max)	mm	1200
유압 배출 스트로크	mm	350
유압 방출력	kN	230
전원 장치
펌프 모터	kW	85
난방능력	kW	71
일반적인
오일탱크 용량	L	780

기계 차원

Clamping Unit

Platen Dimensions

Robot

Front View

Top View

Side View

#	Value
A	2470 mm
B	2351 mm
C	2840 mm
D	2250 mm
E	1676 mm
F	1625 mm
G	1198 mm
H	1042 mm
I	544 mm
J	4699 mm
K	4689 mm
M	4014 mm
N	1840

Q & A

Why There's An Additional Static Charge Ring Installed to Some IML System?

For visitors of SWITEKK website will find that for the IML system no matter if it's side entry IML robot or Top Entry IML Robot, you can see a ring just outside the mold area in some of the IML system but not to the other IML system. Why would it happen and what's the function of this ring to the IML system?

The ring installed is a static charging ring. For a better understanding of the function of this static charging ring we'll need to know the types of the labels which we're using in an IML project. For an IML container made from PP (Polypropylene) there're two main types of IML labels, the regular material IML labels which could be easily static charged from the inner side of the label and the metallic label of which has a metallic layer will releas the static immediately. In this case we'll need to have the label static charged from outside of the label. That's why an extra static charging ring is to be installed to the IML system to ensure that the metallic IML label could be well static charged.

For more knowledge about IML and IML solutions just follow up https://www.gechiml.com for the up to date solutions of IML from SWITEK automation and contact Adams for a turn-key solutions of IML.

뜨거운 주입 자동화 뉴스