사출 성형기

JU5500III-2230a twoplaten 사출 성형기

기계 사양

설명	단위	값
주입 장치
샷 볼륨	cm³	1068
샷 무게	g	972
샷 속도	mm/s	372
나사 직경	mm	65
사출압력	MPa	182
나사 L:D 비율	--	21.5
클램핑 유닛
클램핑 력	kN	5500
오프닝 스트로크	mm	1650
타이바 사이의 공간	mm x mm	810 x 800
금형 두께(min)	mm	350
금형 두께(max)	mm	850
유압 배출 스트로크	mm	250
유압 방출력	kN	110
전원 장치
펌프 모터	kW	45
난방능력	kW	33
일반적인
오일탱크 용량	L	450

기계 차원

Clamping Unit

Platen Dimensions

Robot

Front View

Top View

Side View

#	Value
A	2070 mm
B	1986 mm
C	2317 mm
D	2300 mm
E	1084 mm
F	1084
G	1082 mm
H	903 mm
I	675 mm
J	3269 mm
K	3597 mm
M	2774 mm
N	1248

Q & A

Why There's An Additional Static Charge Ring Installed to Some IML System?

For visitors of SWITEKK website will find that for the IML system no matter if it's side entry IML robot or Top Entry IML Robot, you can see a ring just outside the mold area in some of the IML system but not to the other IML system. Why would it happen and what's the function of this ring to the IML system?

The ring installed is a static charging ring. For a better understanding of the function of this static charging ring we'll need to know the types of the labels which we're using in an IML project. For an IML container made from PP (Polypropylene) there're two main types of IML labels, the regular material IML labels which could be easily static charged from the inner side of the label and the metallic label of which has a metallic layer will releas the static immediately. In this case we'll need to have the label static charged from outside of the label. That's why an extra static charging ring is to be installed to the IML system to ensure that the metallic IML label could be well static charged.

For more knowledge about IML and IML solutions just follow up https://www.gechiml.com for the up to date solutions of IML from SWITEK automation and contact Adams for a turn-key solutions of IML.

뜨거운 주입 자동화 뉴스