사출 성형기

JU9000III - 5330B Twoplaten 사출 성형기

기계 사양

설명	단위	값
주입 장치
샷 볼륨	cm³	2863
샷 무게	g	2605
샷 속도	mm/s	693
나사 직경	mm	90
사출압력	MPa	161
나사 L:D 비율	--	22
클램핑 유닛
클램핑 력	kN	9000
오프닝 스트로크	mm	1600
타이바 사이의 공간	mm x mm	1180 x 1000
금형 두께(min)	mm	500
금형 두께(max)	mm	1100
유압 배출 스트로크	mm	300
유압 방출력	kN	195
전원 장치
펌프 모터	kW	75
난방능력	kW	54
일반적인
오일탱크 용량	L	730

기계 차원

Clamping Unit

Platen Dimensions

Robot

Front View

Top View

Side View

#	Value
A	2398 mm
B	2286 mm
C	2825 mm
D	2265 mm
E	1627 mm
F	1577 mm
G	1203 mm
H	1027 mm
I	544 mm
J	4512 mm
K	4586 mm
M	3857 mm
N	1740

Q & A

What is a Picking Robot?

A picking robot in an injection project is a robotic arm which will pick the parts from the mould and have it placed on the conveyor or other automation system to have another processing. The projector will choose a picking robot according to the size of the injection molding machine, the injection cycle time, the weight of the parts etc to choose a picking robot.

High Speed Picking Robot SW7112DS

Take the SWITEK hgih speed 3 axis servo robot SW7112DS as an example, with a pay load of 2kg and a dry cycle time of 3.3s only designed for injection molding machine ranging from 150Ton ~ 500Tone, it could be regarded as one of the best picking robot for the thin-wall containers production business with a picking capacity up to 8 cavities of 700ml cups, but if for the picking of a bumper it would not be suitable. Anyway, to choose a picking robot for your injection project, the key point would be: