sales06@switek.biz
+86 186 5927 5869
sales06@switek.biz
+86 186 5927 5869
| 설명 | 단위 | 값 |
|---|---|---|
| 주입 장치 | ||
| 샷 볼륨 | cm3 | 530 |
| 샷 무게 | g | 387 |
| 샷 속도 | mm/s | 510 |
| 나사 직경 | mm | 50 |
| 사출압력 | MPa | 243 |
| 나사 L:D 비율 | -- | 25 |
| 클램핑 유닛 | ||
| 클램핑 력 | kN | 2100 |
| 오프닝 스트로크 | mm | 575 |
| 타이바 사이의 공간 | mm x mm | 580 x 580 |
| 금형 두께(min) | mm | 340 |
| 금형 두께(max) | mm | 690 |
| 유압 배출 스트로크 | mm | 180 |
| 유압 방출력 | kN | 73 |
| 전원 장치 | ||
| 펌프 모터 | kW | 105 |
| 난방능력 | kW | 18.3 |
| 일반적인 | ||
| 오일탱크 용량 | L | 420 |
Platen Dimension
Machine Dimmension
| # | Value |
|---|---|
| A | 222 mm |
| B | 816 mm |
| C | 921 mm |
| D Max | 1600 mm |
| G | 2286 mm |
| M | 6842 mm |
| F Min | 1041 mm |
| S | 237 mm |
| SH | 2226 mm |
What is a Picking Robot?
A picking robot in an injection project is a robotic arm which will pick the parts from the mould and have it placed on the conveyor or other automation system to have another processing. The projector will choose a picking robot according to the size of the injection molding machine, the injection cycle time, the weight of the parts etc to choose a picking robot.
Take the SWITEK hgih speed 3 axis servo robot SW7112DS as an example, with a pay load of 2kg and a dry cycle time of 3.3s only designed for injection molding machine ranging from 150Ton ~ 500Tone, it could be regarded as one of the best picking robot for the thin-wall containers production business with a picking capacity up to 8 cavities of 700ml cups, but if for the picking of a bumper it would not be suitable. Anyway, to choose a picking robot for your injection project, the key point would be:뜨거운 주입 자동화 뉴스
E-mail: sales@switek.biz
블로거에게 연락하기
sales06@switek.biz
+86 186 5927 5869
DongGuan, GuangDong, China
자동화 솔루션
