sales06@switek.biz
+86 186 5927 5869
sales06@switek.biz
+86 186 5927 5869
| Descrição | Unidade | Valor |
|---|---|---|
| UNIDADE DE INJEÇÃO | ||
| Volume de tiro | cm3 | 6835 |
| Peso do tiro | g | 6152 |
| Velocidade de tiro | mm/s | 557 |
| Diâmetro do parafuso | mm | 125 |
| Pressão de injeção | MPa | 180 |
| Proporção L:D do parafuso | -- | 20 |
| UNIDADE DE APERTO | ||
| Força de aperto | kN | 12500 |
| Curso de abertura | mm | 1300 |
| Espaço entre barras de ligação | mm x mm | 1250 x 1250 |
| Espessura do molde(min) | mm | 500 |
| Espessura do molde(max) | mm | 1300 |
| Curso de ejeção hidráulica | mm | 350 |
| Força de ejeção hidráulica | kN | 250 |
| UNIDADE DE ENERGIA | ||
| Motor da bomba | kW | 550 |
| Capacidade de aquecimento | kW | 74 |
| EM GERAL | ||
| Capacidade do tanque de óleo | L | 1600 |
Platen Dimension
Machine Dimmension
| # | Value |
|---|---|
| A | 2867 mm |
| B | 2530 mm |
| C | 2853 mm |
| D | 5485 mm |
| E | 5060 mm |
| F | 12149 mm |
| G | 1482 mm |
| H | 2812 mm |
For vision control system for IML containers, what's the advantages and disadvantages of the open type of vision control system?
Vision control is now a very important in IML system especially the IML solutions for dairy products packages like yogurt cups, butter cups etc. For most European IML solutions providers like BRINK that they'll choose an open type of Vision control system which will check if the containers are well labeled or not immediately after the containers picked out from the mold and have them re-stacked after the vision control. This kind of solution will help to increase the efficiency of the IML System and pick out the defect parts quickly.
But, for some minor defect like dirt it would be impossible to be checked out because the precision of the cameras would be influenced by the changing light of the environment. To solve this problem the updated solution would be to have the IML containers checked in a closed light box which will creat a stable environment to the camera to minimize the misjudgement of the good and non good parts. -- SWITEK Yogurt Cups Vision Control Solution
Notícias sobre automação de injeção a quente
E-mail: sales@switek.biz
Contact Blogger
sales06@switek.biz
+86 186 5927 5869
DongGuan, GuangDong, China
