sales06@switek.biz
+86 186 5927 5869
sales06@switek.biz
+86 186 5927 5869
| Descrição | Unidade | Valor |
|---|---|---|
| UNIDADE DE INJEÇÃO | ||
| Volume de tiro | cm3 | 163 |
| Peso do tiro | g | 147 |
| Velocidade de tiro | mm/s | 200 |
| Diâmetro do parafuso | mm | 36 |
| Pressão de injeção | MPa | 266 |
| Proporção L:D do parafuso | -- | 22 |
| UNIDADE DE APERTO | ||
| Força de aperto | kN | 2800 |
| Curso de abertura | mm | 600 |
| Espaço entre barras de ligação | mm x mm | 730 x 730 |
| Espessura do molde(min) | mm | 300 |
| Espessura do molde(max) | mm | 750 |
| Curso de ejeção hidráulica | mm | 150 |
| Força de ejeção hidráulica | kN | 60 |
| UNIDADE DE ENERGIA | ||
| Motor da bomba | kW | 24 |
| Capacidade de aquecimento | kW | 12.52 |
| EM GERAL | ||
| Capacidade do tanque de óleo | L | 0 |
Platen Dimension
Machine Dimmension
| # | Value |
|---|---|
| A | 6292 mm |
| B | 1047 mm |
| C | 1576 mm |
| D | 380 mm |
| E | 1463 mm |
| F | 301 mm |
| G | 1821 mm |
| H | 2226 mm |
| I | φ100 mm |
| J | φ3 mm |
Will Hybrid An Ideal Injection Molding Machine for IML Project?
Hybrid injection molding machine, a combination of the all electric injection molding machine and the hydraulic injection molding machine, it's no doubt one of the best injection molding machine for your IML project. A hybrid injection molding machine will have the precision of plastic injection also the much lower cost against the all electric injection molding machine.
One of the best buy hybrid injection molding machine made in China is the LDY series of hybrid injection molding machine made by Haida, one of the injection molding machine manufacturer founded in 1992 and is famous for the reliability of the injection molding machines. The LDY series of hybrid injection molding machine is their key products for thin-wall container production markets with a clamping force ranging from 100~420T.
For your IML project, the best IML robot to match Haida LDY series hybrid injection molding machine would be SWITEK SW8 Series IML robot, with control systems by European system provider SigmaTek, the cycle time of SW8 series of IML robot can reach 2.0s for the IML production of small size thin-wall containers or lids. It's one of the fastest IML robot made in China.
Notícias sobre automação de injeção a quente
E-mail: sales@switek.biz
Contact Blogger
sales06@switek.biz
+86 186 5927 5869
DongGuan, GuangDong, China
