Máquina de moldagem por injeção

JU10800III - 11300A Twoplaten Máquina de moldagem por injeção

Especificação da máquina

Descrição	Unidade	Valor
UNIDADE DE INJEÇÃO
Volume de tiro	cm³	5227
Peso do tiro	g	4756
Velocidade de tiro	mm/s	924
Diâmetro do parafuso	mm	110
Pressão de injeção	MPa	190
Proporção L:D do parafuso	--	26.2
UNIDADE DE APERTO
Força de aperto	kN	10800
Curso de abertura	mm	1900
Espaço entre barras de ligação	mm x mm	1260 x 1100
Espessura do molde(min)	mm	500
Espessura do molde(max)	mm	1200
Curso de ejeção hidráulica	mm	350
Força de ejeção hidráulica	kN	230
UNIDADE DE ENERGIA
Motor da bomba	kW	130
Capacidade de aquecimento	kW	104
EM GERAL
Capacidade do tanque de óleo	L	1250

Dimensão da Máquina

Clamping Unit

Platen Dimensions

Robot

Front View

Top View

Side View

#	Value
A	2470 mm
B	2351 mm
C	4180 mm
D	2250 mm
E	1676 mm
F	1625 mm
G	1318 mm
H	1212 mm
I	544 mm
J	4699 mm
K	4913 mm
M	4014 mm
N	1840

Q & A

For vision control system for IML containers, what's the advantages and disadvantages of the open type of vision control system?

Vision control is now a very important in IML system especially the IML solutions for dairy products packages like yogurt cups, butter cups etc. For most European IML solutions providers like BRINK that they'll choose an open type of Vision control system which will check if the containers are well labeled or not immediately after the containers picked out from the mold and have them re-stacked after the vision control. This kind of solution will help to increase the efficiency of the IML System and pick out the defect parts quickly.

But, for some minor defect like dirt it would be impossible to be checked out because the precision of the cameras would be influenced by the changing light of the environment. To solve this problem the updated solution would be to have the IML containers checked in a closed light box which will creat a stable environment to the camera to minimize the misjudgement of the good and non good parts. -- SWITEK Yogurt Cups Vision Control Solution

Notícias sobre automação de injeção a quente