Máquina de moldagem por injeção

JU4500III-2230B twoplaten Máquina de moldagem por injeção

Especificação da máquina

Descrição	Unidade	Valor
UNIDADE DE INJEÇÃO
Volume de tiro	cm³	1239
Peso do tiro	g	1128
Velocidade de tiro	mm/s	431
Diâmetro do parafuso	mm	70
Pressão de injeção	MPa	157
Proporção L:D do parafuso	--	20
UNIDADE DE APERTO
Força de aperto	kN	4500
Curso de abertura	mm	1050
Espaço entre barras de ligação	mm x mm	810 x 800
Espessura do molde(min)	mm	350
Espessura do molde(max)	mm	850
Curso de ejeção hidráulica	mm	250
Força de ejeção hidráulica	kN	110
UNIDADE DE ENERGIA
Motor da bomba	kW	45
Capacidade de aquecimento	kW	33
EM GERAL
Capacidade do tanque de óleo	L	450

Dimensão da Máquina

Clamping Unit

Platen Dimensions

Robot

Front View

Top View

Side View

#	Value
A	2070 mm
B	1986 mm
C	2317 mm
D	2300 mm
E	1084 mm
F	1084
G	1082 mm
H	903 mm
I	675 mm
J	3269 mm
K	3597 mm
M	2774 mm
N	1248

Q & A

For Thin Wall Container IML Production, Will YIZUME P250E or P250K3 a Better Choice for Your Project?

As for which injection molding machine is a better choice for your IML project, it'll depends on your budget and requirement about the parts. As we know both P250E and P280K3 are excellent high speed injection molding machine designed for the injection production of thin wall containers with high injection speed for the fast injection of thin wall containers. They're no dobt excellent injection molding machine for your IML project. But, how to make a decision between?

Both P250E and P250K3 has similar injection speed (300/500 mm/s optional for P250E and 320mm/s for P250K3) but P250E is an all electric injection molding machine while P250K3 is a high speed hydraulic injection molding machine. Of course an all electric injection molding machine is a better choice for food container IML production, but, the cost of it would be much higher than P250K3. So, if your budget is sufficient, P250E, if not, P250K3 would be the right one for you.

The IML robot for YIZUMI P250K3/P250E would be SWITEK IML Robot SW833. In K2019 SWITEK IML robot SW833 work with P250E in demo of 4 cavities cups at the cycle time of 2.1s, this combination is one of the best IML solution for small size containers IML production.

Notícias sobre automação de injeção a quente