Máquina de moldagem por injeção

JU5500III-2230B twoplaten Máquina de moldagem por injeção

Especificação da máquina

Descrição	Unidade	Valor
UNIDADE DE INJEÇÃO
Volume de tiro	cm³	1239
Peso do tiro	g	1128
Velocidade de tiro	mm/s	431
Diâmetro do parafuso	mm	70
Pressão de injeção	MPa	157
Proporção L:D do parafuso	--	20
UNIDADE DE APERTO
Força de aperto	kN	5500
Curso de abertura	mm	1300
Espaço entre barras de ligação	mm x mm	920 x 830
Espessura do molde(min)	mm	350
Espessura do molde(max)	mm	900
Curso de ejeção hidráulica	mm	250
Força de ejeção hidráulica	kN	110
UNIDADE DE ENERGIA
Motor da bomba	kW	45
Capacidade de aquecimento	kW	33
EM GERAL
Capacidade do tanque de óleo	L	450

Dimensão da Máquina

Clamping Unit

Platen Dimensions

Robot

Front View

Top View

Side View

#	Value
A	2110 mm
B	2016 mm
C	2327 mm
D	2250 mm
E	1175 mm
F	1175
G	1082 mm
H	903 mm
I	675 mm
J	3581 mm
K	3705 mm
M	3056 mm
N	1400

Q & A

Why There's An Additional Static Charge Ring Installed to Some IML System?

For visitors of SWITEKK website will find that for the IML system no matter if it's side entry IML robot or Top Entry IML Robot, you can see a ring just outside the mold area in some of the IML system but not to the other IML system. Why would it happen and what's the function of this ring to the IML system?

The ring installed is a static charging ring. For a better understanding of the function of this static charging ring we'll need to know the types of the labels which we're using in an IML project. For an IML container made from PP (Polypropylene) there're two main types of IML labels, the regular material IML labels which could be easily static charged from the inner side of the label and the metallic label of which has a metallic layer will releas the static immediately. In this case we'll need to have the label static charged from outside of the label. That's why an extra static charging ring is to be installed to the IML system to ensure that the metallic IML label could be well static charged.

For more knowledge about IML and IML solutions just follow up https://www.gechiml.com for the up to date solutions of IML from SWITEK automation and contact Adams for a turn-key solutions of IML.

Notícias sobre automação de injeção a quente