Máquina de moldagem por injeção

JU6500III - 4630C Twoplaten Máquina de moldagem por injeção

Especificação da máquina

Descrição	Unidade	Valor
UNIDADE DE INJEÇÃO
Volume de tiro	cm³	2799
Peso do tiro	g	2547
Velocidade de tiro	mm/s	665
Diâmetro do parafuso	mm	90
Pressão de injeção	MPa	143
Proporção L:D do parafuso	--	19.6
UNIDADE DE APERTO
Força de aperto	kN	6500
Curso de abertura	mm	1350
Espaço entre barras de ligação	mm x mm	1040 x 910
Espessura do molde(min)	mm	400
Espessura do molde(max)	mm	950
Curso de ejeção hidráulica	mm	250
Força de ejeção hidráulica	kN	110
UNIDADE DE ENERGIA
Motor da bomba	kW	65
Capacidade de aquecimento	kW	48
EM GERAL
Capacidade do tanque de óleo	L	600

Dimensão da Máquina

Clamping Unit

Platen Dimensions

Robot

Front View

Top View

Side View

#	Value
A	2165 mm
B	2066 mm
C	2671 mm
D	2200 mm
E	1290 mm
F	1290
G	1177 mm
H	943 mm
I	675 mm
J	3746 mm
K	3909 mm
M	3191 mm
N	1560

Q & A

For vision control system for IML containers, what's the advantages and disadvantages of the open type of vision control system?

Vision control is now a very important in IML system especially the IML solutions for dairy products packages like yogurt cups, butter cups etc. For most European IML solutions providers like BRINK that they'll choose an open type of Vision control system which will check if the containers are well labeled or not immediately after the containers picked out from the mold and have them re-stacked after the vision control. This kind of solution will help to increase the efficiency of the IML System and pick out the defect parts quickly.

But, for some minor defect like dirt it would be impossible to be checked out because the precision of the cameras would be influenced by the changing light of the environment. To solve this problem the updated solution would be to have the IML containers checked in a closed light box which will creat a stable environment to the camera to minimize the misjudgement of the good and non good parts. -- SWITEK Yogurt Cups Vision Control Solution

Notícias sobre automação de injeção a quente