Máquina de moldagem por injeção

JU7500III - 5330D Twoplaten Máquina de moldagem por injeção

Especificação da máquina

Descrição	Unidade	Valor
UNIDADE DE INJEÇÃO
Volume de tiro	cm³	4276
Peso do tiro	g	3892
Velocidade de tiro	mm/s	1036
Diâmetro do parafuso	mm	110
Pressão de injeção	MPa	108
Proporção L:D do parafuso	--	18
UNIDADE DE APERTO
Força de aperto	kN	7500
Curso de abertura	mm	1400
Espaço entre barras de ligação	mm x mm	1110 x 960
Espessura do molde(min)	mm	450
Espessura do molde(max)	mm	950
Curso de ejeção hidráulica	mm	300
Força de ejeção hidráulica	kN	195
UNIDADE DE ENERGIA
Motor da bomba	kW	75
Capacidade de aquecimento	kW	54
EM GERAL
Capacidade do tanque de óleo	L	730

Dimensão da Máquina

Clamping Unit

Platen Dimensions

Robot

Front View

Top View

Side View

#	Value
A	2208 mm
B	2106 mm
C	2685 mm
D	2200 mm
E	1506 mm
F	1354 mm
G	1203 mm
H	1027 mm
I	544 mm
J	4055 mm
K	4478 mm
M	3450 mm
N	1607

Q & A

Why is HMD270M8SPV One of the Best High Speed Hydraulic Injection Molding Machine for Small Size Containers IML Production?

As one of the best buy high speed hydraulic injection molding machine for thin-wall containers made in China, HMD270M8SPV is no doubt one an excellent injection molding machine for thin-wall containers high speed production. As the star injection molding machine by HMD group, HMD270M8SPV has the advangates below:

Improved platen with high rigidity structure, especially suitable for thin-wall containers IML production.
Parallel movement and high-speed/low pressure injection movement that shortens circle time, especially for thin wall products IML production.
High-speed hydraulic motor.
Opening stroke up to 560mm, suitable for the IML productions of containers with height up to 136mm.
Injection speed up to 368mm/s, with possible of a cycle time of IML production lower to 2s.

To match the excellent injection speed of HMD270M8SPV, the best IML robot would be SWITEK high speed side entry IML Robot SW833, with the control system by the European automation control system supplier SigmaTek, the dry cycle time of the IML robot can be lower than 2.1s, which will perfecctly match the productivity of HMD270M8SPV.

Notícias sobre automação de injeção a quente