Máquina de moldagem por injeção

JU9000III - 6730A Twoplaten Máquina de moldagem por injeção

Especificação da máquina

Descrição	Unidade	Valor
UNIDADE DE INJEÇÃO
Volume de tiro	cm³	2990
Peso do tiro	g	2721
Velocidade de tiro	mm/s	642
Diâmetro do parafuso	mm	90
Pressão de injeção	MPa	193
Proporção L:D do parafuso	--	24.4
UNIDADE DE APERTO
Força de aperto	kN	9000
Curso de abertura	mm	1600
Espaço entre barras de ligação	mm x mm	1180 x 1000
Espessura do molde(min)	mm	500
Espessura do molde(max)	mm	1100
Curso de ejeção hidráulica	mm	300
Força de ejeção hidráulica	kN	195
UNIDADE DE ENERGIA
Motor da bomba	kW	75
Capacidade de aquecimento	kW	54
EM GERAL
Capacidade do tanque de óleo	L	780

Dimensão da Máquina

Clamping Unit

Platen Dimensions

Robot

Front View

Top View

Side View

#	Value
A	2398 mm
B	2286 mm
C	2840 mm
D	2265 mm
E	1627 mm
F	1577 mm
G	1198 mm
H	1042 mm
I	544 mm
J	4512 mm
K	4581 mm
M	3857 mm
N	1740

Q & A

Why is HMD270M8SPV One of the Best High Speed Hydraulic Injection Molding Machine for Small Size Containers IML Production?

As one of the best buy high speed hydraulic injection molding machine for thin-wall containers made in China, HMD270M8SPV is no doubt one an excellent injection molding machine for thin-wall containers high speed production. As the star injection molding machine by HMD group, HMD270M8SPV has the advangates below:

Improved platen with high rigidity structure, especially suitable for thin-wall containers IML production.
Parallel movement and high-speed/low pressure injection movement that shortens circle time, especially for thin wall products IML production.
High-speed hydraulic motor.
Opening stroke up to 560mm, suitable for the IML productions of containers with height up to 136mm.
Injection speed up to 368mm/s, with possible of a cycle time of IML production lower to 2s.

To match the excellent injection speed of HMD270M8SPV, the best IML robot would be SWITEK high speed side entry IML Robot SW833, with the control system by the European automation control system supplier SigmaTek, the dry cycle time of the IML robot can be lower than 2.1s, which will perfecctly match the productivity of HMD270M8SPV.

Notícias sobre automação de injeção a quente