Máquina de moldagem por injeção

MA1600/540G - B servo Máquina de moldagem por injeção

Especificação da máquina

Descrição	Unidade	Valor
UNIDADE DE INJEÇÃO
Volume de tiro	cm³	320
Peso do tiro	g	291
Velocidade de tiro	mm/s	140
Diâmetro do parafuso	mm	45
Pressão de injeção	MPa	169
Proporção L:D do parafuso	--	20
UNIDADE DE APERTO
Força de aperto	kN	1600
Curso de abertura	mm	420
Espaço entre barras de ligação	mm x mm	455 x 455
Espessura do molde(min)	mm	180
Espessura do molde(max)	mm	500
Curso de ejeção hidráulica	mm	140
Força de ejeção hidráulica	kN	33
UNIDADE DE ENERGIA
Motor da bomba	kW	15
Capacidade de aquecimento	kW	11.55
EM GERAL
Capacidade do tanque de óleo	L	235

Dimensão da Máquina

Platen Dimensions

Machine Dimmension

Q & A

For vision control system for IML containers, what's the advantages and disadvantages of the open type of vision control system?

Vision control is now a very important in IML system especially the IML solutions for dairy products packages like yogurt cups, butter cups etc. For most European IML solutions providers like BRINK that they'll choose an open type of Vision control system which will check if the containers are well labeled or not immediately after the containers picked out from the mold and have them re-stacked after the vision control. This kind of solution will help to increase the efficiency of the IML System and pick out the defect parts quickly.

But, for some minor defect like dirt it would be impossible to be checked out because the precision of the cameras would be influenced by the changing light of the environment. To solve this problem the updated solution would be to have the IML containers checked in a closed light box which will creat a stable environment to the camera to minimize the misjudgement of the good and non good parts. -- SWITEK Yogurt Cups Vision Control Solution

Notícias sobre automação de injeção a quente